P0826 2012 Nissan Rogue Code - Manual Mode Switch Circuit
Quick Answer
Manual mode switch is installed in shift control device. Common causes include Faulty Manual mode select switch (Built into control device, shifter), Faulty Manual mode position select switch (Built into control device, shifter), Faulty Control Device (Shifter). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0826 2012 Nissan Rogue indicates Manual Mode Switch Circuit.
- Common causes
- Common causes include Faulty Manual mode select switch (Built into control device, shifter), Faulty Manual mode position select switch (Built into control device, shifter), Faulty Control Device (Shifter).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0826 2012 Nissan Rogue Description
TCM sends the switch signals to combination meter via CAN communication line. Then manual mode switch position is indicated on the shift position indicator.
What are the Possible Causes of the DTC P0826 2012 Nissan Rogue?
- Faulty Manual mode select switch (Built into control device, shifter)
- Faulty Manual mode position select switch (Built into control device, shifter)
- Faulty Control Device (Shifter)
- Control Device harness is open or shorted
- Control Device circuit poor electrical connection
How to Fix the DTC P0826 2012 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0826 2012 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80β$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0826 2012 Nissan Rogue code?
Need more information on how to fix the P0826 2012 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0826 2012 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0826 2012 Nissan Rogue Code
1. What is OBDII code P0826 on a 2012 Nissan Rogue?
The OBDII code P0826 on a 2012 Nissan Rogue indicates a problem with the Manual Mode Switch Circuit.
2. What are the common symptoms of OBDII code P0826 in a 2012 Nissan Rogue?
Common symptoms of OBDII code P0826 in a 2012 Nissan Rogue include issues with shifting gears manually and the inability to engage manual mode.
3. What are the potential causes of OBDII code P0826 in a 2012 Nissan Rogue?
Potential causes of OBDII code P0826 in a 2012 Nissan Rogue include a faulty manual mode switch, damaged wiring or connectors in the circuit, or a malfunctioning transmission control module.
4. How can I diagnose OBDII code P0826 on my 2012 Nissan Rogue?
Diagnosing OBDII code P0826 on a 2012 Nissan Rogue involves inspecting the manual mode switch, checking the wiring and connectors for damage, and using a diagnostic scanner to read the fault codes stored in the system.
5. Can I drive my 2012 Nissan Rogue with OBDII code P0826?
It is not recommended to drive your 2012 Nissan Rogue with OBDII code P0826, as it can lead to further transmission issues and potential safety hazards. It is advisable to have the issue diagnosed and repaired as soon as possible.
6. How can I repair OBDII code P0826 on my 2012 Nissan Rogue?
Repairing OBDII code P0826 on a 2012 Nissan Rogue may involve replacing the manual mode switch, repairing or replacing damaged wiring or connectors, or reprogramming the transmission control module.
7. Can OBDII code P0826 in a 2012 Nissan Rogue cause other problems?
If left unresolved, OBDII code P0826 in a 2012 Nissan Rogue can lead to difficulties in manually shifting gears, potential transmission issues, and overall drivability problems.
8. Is OBDII code P0826 a common issue in 2012 Nissan Rogues?
While not extremely common, OBDII code P0826 can occur in 2012 Nissan Rogues due to various factors such as wear and tear on components or electrical faults.
9. How much does it cost to fix OBDII code P0826 on a 2012 Nissan Rogue?
The cost to fix OBDII code P0826 on a 2012 Nissan Rogue can vary depending on the exact cause of the issue, parts needed for repair, and labor costs. It is recommended to consult with a mechanic for an accurate estimate.
10. Can I reset OBDII code P0826 on my 2012 Nissan Rogue by disconnecting the battery?
While disconnecting the battery may temporarily clear the code, it is not a recommended method to reset OBDII code P0826 on a 2012 Nissan Rogue. It is best to diagnose the root cause of the issue and address it appropriately.
Discuss the causes and fixes for P0826 2012 Nissan Rogue OBDII Code
Code P0826 2012 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.