P0826 2010 Nissan Rogue Code - Manual Mode Switch Circuit
Quick Answer
Manual mode switch is installed in shift control device. Common causes include Faulty Manual mode select switch (Built into control device, shifter), Faulty Manual mode position select switch (Built into control device, shifter), Faulty Control Device (Shifter). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0826 2010 Nissan Rogue indicates Manual Mode Switch Circuit.
- Common causes
- Common causes include Faulty Manual mode select switch (Built into control device, shifter), Faulty Manual mode position select switch (Built into control device, shifter), Faulty Control Device (Shifter).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0826 2010 Nissan Rogue Description
TCM sends the switch signals to combination meter via CAN communication line. Then manual mode switch position is indicated on the shift position indicator.
What are the Possible Causes of the DTC P0826 2010 Nissan Rogue?
- Faulty Manual mode select switch (Built into control device, shifter)
- Faulty Manual mode position select switch (Built into control device, shifter)
- Faulty Control Device (Shifter)
- Control Device harness is open or shorted
- Control Device circuit poor electrical connection
How to Fix the DTC P0826 2010 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0826 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0826 2010 Nissan Rogue code?
Need more information on how to fix the P0826 2010 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0826 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0826 2010 Nissan Rogue Code
What does the OBDII code P0826 indicate for a 2010 Nissan Rogue?
P0826 indicates a problem with the manual mode switch circuit, which is used to enable and disable manual shifting in the transmission.
What are common symptoms of the P0826 code?
Common symptoms include the check engine light being illuminated, difficulty shifting gears, or the transmission stuck in a certain mode.
What could cause the P0826 code to trigger?
Causes can include a malfunctioning manual mode switch, wiring issues, or a faulty transmission control module (TCM).
How can I diagnose the P0826 code?
To diagnose P0826, start by inspecting the manual mode switch and wiring for damage, then use a multimeter to check for proper voltage and continuity in the circuit.
What are some potential repair options for P0826?
Repair options may include replacing the manual mode switch, repairing any damaged wiring, or reprogramming or replacing the TCM if it's found to be faulty.
Can I drive my Nissan Rogue with the P0826 code?
While you may be able to drive the vehicle, it is not recommended as it could lead to further transmission issues or affect drivability.
What should I do if the P0826 code keeps coming back after repairs?
If the code persists, consider rechecking the circuit connections, ensuring proper installation of new parts, and scanning for any other related trouble codes that may provide more clues.
Is it necessary to clear the code after repairs?
Yes, after making repairs, you should clear the code and perform a test drive to see if the check engine light reappears.
Will resetting the battery clear the P0826 code?
Resetting the battery may clear the code temporarily, but it will not fix the underlying issue causing the P0826 code to trigger.
Discuss the causes and fixes for P0826 2010 Nissan Rogue OBDII Code
Code P0826 2010 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
