AutoCodes – Chrysler – P0817 Chrysler

P0817 Chrysler Code - Starter Disable Circuit

Quick Answer

The Transmission Control Module (TCM) monitors the Starter Disable Circuit signal. Common causes include Faulty Starter Relay, Starter Relay harness is open or shorted, Starter Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0817 Chrysler indicates Starter Disable Circuit.
Common causes: Common causes include Faulty Starter Relay, Starter Relay harness is open or shorted, Starter Relay circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,548

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 09, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0817 Chrysler Description

The Transmission Control Module (TCM) monitors the Starter Disable Circuit signal. The TCM sets the OBDII code when the Starter Disable Circuit signal is not to factory specifications.

OBDII Code P0817 Chrysler - Starter Disable Circuit - AutoCodes.com — P0817 Chrysler Code - Starter Disable Circuit

What does this mean?

What are the Possible Causes of the DTC P0817 Chrysler?

Faulty Starter Relay
Starter Relay harness is open or shorted
Starter Relay circuit poor electrical connection

How to Fix the DTC P0817 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0817 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0817 Chrysler code?

Need more information on how to fix the P0817 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0817 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0817 Chrysler Code

1. What are the common symptoms of OBDII code P0817 Chrysler (Starter Disable Circuit)?

- Common symptoms include the engine not cranking or starting, the vehicle not responding when attempting to start, and the "Starter Disabled" warning message on the dashboard.

2. What are the possible causes of OBDII code P0817 Chrysler?

- The code P0817 Chrysler is typically triggered by issues with the starter disable circuit, such as a faulty starter relay, damaged wiring, a defective ignition switch, or a malfunctioning immobilizer system.

3. How can I diagnose OBDII code P0817 Chrysler?

- To diagnose code P0817 Chrysler, you can use an OBDII scanner to retrieve the code and then inspect the starter disable circuit components, such as the starter relay, wiring, ignition switch, and immobilizer system, for any signs of damage or malfunction.

4. What are some repair tips for fixing OBDII code P0817 Chrysler?

- Repair tips for addressing code P0817 Chrysler may include checking and replacing the starter relay, repairing any damaged wiring, testing and potentially replacing the ignition switch, and troubleshooting the immobilizer system if necessary.

5. Can I still drive my vehicle with OBDII code P0817 Chrysler?

- It is not recommended to drive your vehicle with OBDII code P0817 Chrysler, as it indicates a problem with the starter disable circuit that may prevent your car from starting. It is best to address the issue promptly to avoid potential starting or drivability issues.

6. Will resetting the OBDII code P0817 Chrysler make the problem go away?

- Resetting the OBDII code P0817 Chrysler may temporarily clear the warning light, but it will not fix the underlying issue with the starter disable circuit. It is important to diagnose and repair the root cause of the problem to prevent further issues.

7. How much does it typically cost to repair OBDII code P0817 Chrysler?

- The cost of repairing OBDII code P0817 Chrysler can vary depending on the specific cause of the issue and the labor rates in your area. It is recommended to consult with a qualified mechanic or dealership for an accurate estimate.

8. Can a DIY enthusiast fix OBDII code P0817 Chrysler at home?

- Depending on your skill level and access to tools, some DIY enthusiasts may be able to address OBDII code P0817 Chrysler at home by inspecting and potentially replacing the starter disable circuit components. However, complex issues may require professional assistance.

9. Is OBDII code P0817 Chrysler a common problem in Chrysler vehicles?

- OBDII code P0817 Chrysler related to the starter disable circuit is not as common as other codes, but it can still occur in Chrysler vehicles due to issues with the starter relay, wiring, ignition switch, or immobilizer system.

10. How can I prevent OBDII code P0817 Chrysler from occurring in the future?

- To prevent OBDII code P0817 Chrysler from occurring in the future, regularly inspect and maintain your vehicle's starter disable circuit components, address any warning signs promptly, and follow the manufacturer's recommended maintenance schedule.