AutoCodes – Jeep – P0810 Jeep

P0810 Jeep Code - Clutch Position Control Error

Quick Answer

The Transmission Control Module (TCM) monitors the Clutch Position Sensor signal. Common causes include Faulty Clutch Position Sensor, Clutch Position Sensor harness is open or shorted, Clutch Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0810 Jeep indicates Clutch Position Control Error.
Common causes: Common causes include Faulty Clutch Position Sensor, Clutch Position Sensor harness is open or shorted, Clutch Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 15,155

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 09, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0810 Jeep Description

The Transmission Control Module (TCM) monitors the Clutch Position Sensor signal. The TCM sets the OBDII code when the Clutch Position Sensor is not to factory specifications.

OBDII Code P0810 Jeep - Clutch Position Control Error - AutoCodes.com — P0810 Jeep Code - Clutch Position Control Error

What does this mean?

What are the Possible Causes of the DTC P0810 Jeep?

Faulty Clutch Position Sensor
Clutch Position Sensor harness is open or shorted
Clutch Position Sensor circuit poor electrical connection

How to Fix the DTC P0810 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0810 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0810 Jeep code?

Need more information on how to fix the P0810 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0810 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0810 Jeep Code

1. What are the common symptoms of OBDII code P0810 in a Jeep related to Clutch Position Control Error?

The common symptoms of P0810 in a Jeep include difficulty shifting gears, a clutch pedal that feels loose or spongy, and potential stalling issues.

2. What are the possible causes of OBDII code P0810 indicating Clutch Position Control Error in a Jeep?

The potential causes of P0810 in a Jeep include a faulty clutch position sensor, damaged wiring or connectors in the clutch position control circuit, or issues with the clutch actuator.

3. How can I diagnose OBDII code P0810 in my Jeep related to Clutch Position Control Error?

Diagnosing P0810 involves using an OBDII scanner to retrieve the code, inspecting the clutch position sensor and related components for damage, and checking the wiring and connectors for any issues.

4. Can I continue driving my Jeep with OBDII code P0810 indicating Clutch Position Control Error?

It is not recommended to drive your Jeep with P0810 as it can lead to further damage to the clutch system and potentially result in safety hazards. It is advisable to address the issue promptly.

5. How can I repair OBDII code P0810 related to Clutch Position Control Error in my Jeep?

Repairing P0810 may involve replacing the faulty clutch position sensor, repairing or replacing damaged wiring or connectors, or addressing any issues with the clutch actuator to resolve the error code.

6. Is it possible to reset OBDII code P0810 in a Jeep indicating Clutch Position Control Error?

Resetting the code is possible, but it is important to address the underlying issue causing P0810 first. Simply resetting the code without fixing the problem may lead to it reoccurring.

7. How much does it cost to repair OBDII code P0810 related to Clutch Position Control Error in a Jeep?

The cost of repairing P0810 can vary depending on the specific issue causing the code and whether you do the repairs yourself or take your Jeep to a mechanic. Costs may include parts and labor.

8. Are there any preventive maintenance tips to avoid OBDII code P0810 in a Jeep related to Clutch Position Control Error?

To help prevent P0810, it is advisable to perform regular maintenance on your Jeep's clutch system, including checking for any signs of wear or damage, and addressing any issues promptly.

9. Can a DIY enthusiast repair OBDII code P0810 indicating Clutch Position Control Error in a Jeep?

If you have experience working on automotive systems and access to the necessary tools and resources, you may be able to repair P0810 yourself. However, it is recommended to proceed with caution and follow proper procedures.

10. How long does it typically take to repair OBDII code P0810 in a Jeep related to Clutch Position Control Error?

The repair time for P0810 can vary depending on the specific cause of the code, your level of experience, and the availability of parts. It may range from a few hours to a full day, depending on the complexity of the repair.