AutoCodes – Pontiac – P0803 Pontiac

P0803 Pontiac Code - Skip Shift Solenoid Control Circuit

Quick Answer

An ignition voltage is supplied to the Skip Shift solenoid coil. Common causes include Faulty Skip Shift Solenoid, Skip Shift Solenoid harness is open or shorted, Skip Shift Solenoid circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0803 Pontiac indicates Skip Shift Solenoid Control Circuit.
Common causes
Common causes include Faulty Skip Shift Solenoid, Skip Shift Solenoid harness is open or shorted, Skip Shift Solenoid circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,862
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 08, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0803 Pontiac Description

An ignition voltage is supplied to the Skip Shift solenoid coil. The Powertrain Control Module (PCM) controls the solenoid by grounding the control circuit via an internal switch called a driver. The driver supplies the ground for the component being controlled. Each driver has a fault line which the PCM monitors. When the PCM commands a component ON, the voltage of the control circuit should be low (near 0 volts). When the PCM commands the control circuit to a component OFF, the voltage potential of the circuit should be high (near battery voltage).
OBDII Code P0803 Pontiac - Skip Shift Solenoid Control Circuit - AutoCodes.com
P0803 Pontiac Code - Skip Shift Solenoid Control Circuit

What are the Possible Causes of the DTC P0803 Pontiac?

  • Faulty Skip Shift Solenoid
  • Skip Shift Solenoid harness is open or shorted
  • Skip Shift Solenoid circuit poor electrical connection

How to Fix the DTC P0803 Pontiac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0803 Pontiac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0803 Pontiac code?

Need more information on how to fix the P0803 Pontiac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0803 Pontiac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0803 Pontiac Code

1. What does the OBDII code P0803 mean for a Pontiac?

P0803 indicates a problem with the skip shift solenoid control circuit, which helps control gear selection in certain manual transmissions.

2. What are the common symptoms of the P0803 code on a Pontiac?

Symptoms may include difficulty shifting gears, a check engine light, or the transmission skipping certain gears.

3. What causes the P0803 code to appear in a Pontiac?

Common causes include a faulty skip shift solenoid, damaged wiring or connectors in the control circuit, or issues with the transmission control module (TCM).

4. How can I diagnose the P0803 code on my Pontiac?

Start by inspecting the wiring and connectors for damage, then test the skip shift solenoid for proper operation using a multimeter.

5. Can I continue driving my Pontiac with the P0803 code?

While the vehicle may still be drivable, ignoring this code could lead to reduced performance or further transmission issues over time.

6. How do I fix the P0803 code on a Pontiac?

Repairs may include replacing the skip shift solenoid, repairing damaged wiring, or reprogramming the transmission control module.

7. Is the P0803 code specific to manual transmissions?

Yes, this code is related to manual transmissions that utilize a skip shift solenoid system.

8. Will clearing the P0803 code fix the problem permanently?

No, clearing the code will reset the check engine light, but the underlying issue must be resolved to prevent the code from returning.

9. How much does it cost to repair the P0803 code on a Pontiac?

Repair costs vary depending on the issue, but replacing the skip shift solenoid typically ranges from $100 to $300, including labor.

10. Can a faulty skip shift solenoid affect fuel efficiency in my Pontiac?

Yes, improper operation of the skip shift solenoid may impact fuel efficiency by preventing optimal gear selection.

Discuss the causes and fixes for P0803 Pontiac OBDII Code

Code P0803 Pontiac comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play