AutoCodes – Chevrolet – P0796 2016 Chevrolet Silverado

P0796 2016 Chevrolet Silverado Code - Pressure Control Solenoid Valve 3 Stuck Off

Quick Answer

The clutch pressure control solenoid 3 is part of the control solenoid valve assembly, which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0796 2016 Chevrolet Silverado indicates Pressure Control Solenoid Valve 3 Stuck Off.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,347

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 25, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0796 2016 Chevrolet Silverado Description

The clutch pressure control solenoid 3 is part of the control solenoid valve assembly, which has no serviceable parts. The Clutch Pressure Control Solenoid 3 regulates transmission fluid pressure to the CBR1/C 4-5-6 clutch regulator valve which controls pressure to the low/reverse clutch and the 4-5-6 clutch. The Transmission Control Module calculates gear ratio based on the RPM signals from the input speed sensor (ISS) and the output speed sensor (OSS). The Transmission Control Module compares the expected transmission gear ratio to the calculated gear ratio for each commanded gear. The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module has detected an incorrect gear ratio or neutral condition when the low and reverse clutch and the 4-5-6 clutch is commanded ON. This condition must occur 3 times.

OBDII Code P0796 2016 Chevrolet Silverado - Pressure Control Solenoid Valve 3 Stuck Off - AutoCodes.com — P0796 2016 Chevrolet Silverado Code - Pressure Control Solenoid Valve 3 Stuck Off

What does this mean?

What are the Possible Causes of the DTC P0796 2016 Chevrolet Silverado?

Low transmission fluid level
Dirty transmission fluid
Faulty Control Solenoid Valve Assembly
Control Solenoid Valve Assembly harness or connectors
Control Solenoid Valve Assembly circuit is open or shorted

How to Fix the DTC P0796 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0796 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0796 2016 Chevrolet Silverado code?

Need more information on how to fix the P0796 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0796 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0796 2016 Chevrolet Silverado Code

1. What does OBDII code P0796 mean on a 2016 Chevrolet Silverado?

Code P0796 indicates that the transmission control module (TCM) has detected that Pressure Control Solenoid Valve 3 is stuck in the "off" position, affecting proper transmission operation.

2. What are the common symptoms of code P0796 in a 2016 Chevy Silverado?

Symptoms include harsh shifting, slipping gears, erratic transmission behavior, reduced fuel efficiency, and activation of the vehicle's check engine light.

3. What causes the P0796 code to appear on a 2016 Silverado?

Common causes include a faulty pressure control solenoid, contaminated transmission fluid, damaged wiring or connectors, or internal transmission issues such as worn clutch packs.

4. Can driving with a P0796 code damage my Silverado's transmission?

Yes, prolonged driving with this issue can lead to further transmission damage and more costly repairs. It's important to address the problem promptly.

5. How do I fix the P0796 code on a 2016 Chevrolet Silverado?

Repairs may include replacing the faulty pressure control solenoid, flushing and replacing the transmission fluid, repairing damaged wiring, or addressing internal transmission problems.

6. How can I diagnose the P0796 code on my Silverado?

Use an OBDII scanner to confirm the code, inspect the transmission fluid condition, check the solenoid's wiring and connectors for damage, and test the solenoid for proper operation.

7. Can low transmission fluid cause the P0796 code?

Yes, low or contaminated transmission fluid can cause solenoid malfunctions and trigger the P0796 code. Always check fluid levels and condition during diagnosis.

8. How much does it cost to fix a P0796 code on a 2016 Chevy Silverado?

Repair costs vary depending on the issue but may range from $150 for a fluid flush to $300-$800 for solenoid replacement. Internal transmission repairs can be more expensive.

9. Is replacing the transmission fluid enough to fix the P0796 code?

In some cases, replacing old or contaminated fluid can resolve the issue. However, if the solenoid or wiring is damaged, additional repairs will be required.

10. Can I clear the P0796 code without fixing the problem?

You can clear the code with an OBDII scanner, but the issue will likely return if the underlying problem isn't resolved. Ignoring it may lead to further transmission damage.