AutoCodes – Scion – P0793 Scion

P0793 Scion Code - Intermediate Shaft Speed Sensor 'A'

Quick Answer

This sensor detects the rotation speed of the counter gear which indicates the output speed of the transaxle. Common causes include Faulty Speed sensor NC (Transmission Revolution Sensor), Speed sensor NC harness is open or shorted, Speed sensor NC circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0793 Scion indicates Intermediate Shaft Speed Sensor 'A'.
Common causes: Common causes include Faulty Speed sensor NC (Transmission Revolution Sensor), Speed sensor NC harness is open or shorted, Speed sensor NC circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 21,142

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 12, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0793 Scion Description

This sensor detects the rotation speed of the counter gear which indicates the output speed of the transaxle. By comparing the input turbine speed (speed sensor NT) signal with the counter gear speed (speed sensor NC) signal, the Engine Control Module (ECM) detects the shift timing of the gears and appropriately controls the engine torque and hydraulic pressure according to various conditions. As a result, the gears shift smoothly.
The NT terminal of the ECM detects a pulse signal from the speed sensor NT (input RPM). The ECM calculates gear shifts by comparing the signal from speed sensor NT with the signal from speed sensor NC.
While the vehicle is operating in 2nd, 3rd, 4th, or 5th gear with the shift lever in D, if the input shaft speed is less than 300 rpm although the output shaft speed is more than 1000 rpm, the ECM interprets this as a fault, illuminates the MIL and stores the Diagnostic Trouble Code (DTC). P0793 code is detected when the vehicle speed is 25 km/h (15.54 mph) or more, the counter gear speed is less than 300 rpm for 2 sec. or more.

OBDII Code P0793 Scion - Intermediate Shaft Speed Sensor 'A' - AutoCodes.com — P0793 Scion Code - Intermediate Shaft Speed Sensor 'A'

What does this mean?

What are the Possible Causes of the DTC P0793 Scion?

Faulty Speed sensor NC (Transmission Revolution Sensor)
Speed sensor NC harness is open or shorted
Speed sensor NC circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0793 Scion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0793 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0793 Scion code?

Need more information on how to fix the P0793 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0793 Scion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.