P0778 2016 Toyota RAV4 Code - Pressure Control Solenoid 'B' Electrical
Quick Answer
Changing from 1st to 6th is performed by the Engine Control Module (ECM) turning shift solenoid valves SL1, SL2, SL3, SL4, and SL on and off. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'B' valve (Shift Solenoid Valve SL2). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0778 2016 Toyota RAV4 indicates Pressure Control Solenoid 'B' Electrical.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'B' valve (Shift Solenoid Valve SL2).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0778 2016 Toyota RAV4 Description
This Diagnostic Trouble Code (DTC) indicates an open or short in the shift solenoid valve SL2 circuit. The ECM commands gear shifts by turning the shift solenoid valves on or off. When there is an open or short circuit in any of the shift solenoid valve circuits, the ECM detects the problem and illuminates the MIL, and stores the DTC. The ECM also performs the fail-safe function and turns the other normal shift solenoid valves on or off. (In case of an open or short circuit, the ECM stops sending current to the circuit.)
While driving and shifting gears, if the ECM detects an open or short in the shift solenoid valve SL2 circuit, the ECM determines there is a malfunction.
What are the Possible Causes of the DTC P0778 2016 Toyota RAV4?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Pressure Control Solenoid 'B' valve (Shift Solenoid Valve SL2)
- Pressure Control Solenoid 'B' valve harness is open or shorted
- Pressure Control Solenoid 'B' valve circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0778 2016 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0778 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0778 2016 Toyota RAV4 code?
Need more information on how to fix the P0778 2016 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0778 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0778 2016 Toyota RAV4 Code
1. What does the OBDII code P0778 mean on a 2016 Toyota RAV4?
P0778 indicates an issue with the "Pressure Control Solenoid 'B' Electrical," which means there is a problem in the transmission solenoid circuit responsible for regulating hydraulic pressure.
2. What are the common symptoms of P0778 in a 2016 Toyota RAV4?
Symptoms may include harsh or delayed shifting, transmission slipping, decreased fuel efficiency, and the illumination of the check engine light.
3. What causes the P0778 code on a 2016 Toyota RAV4?
Common causes include a faulty pressure control solenoid, damaged wiring or connectors in the solenoid circuit, low or contaminated transmission fluid, or a malfunctioning transmission control module (TCM).
4. Can driving with P0778 damage my 2016 Toyota RAV4?
Driving with this code can lead to further transmission damage if the issue is not addressed promptly, as it can disrupt proper hydraulic pressure regulation.
5. How do you diagnose the P0778 code on a 2016 Toyota RAV4?
Diagnosis typically involves scanning the vehicle with an OBDII tool, inspecting the pressure control solenoid and related wiring, checking transmission fluid condition, and testing the TCM functionality.
6. How is the P0778 code fixed on a 2016 Toyota RAV4?
Repairs may include replacing the faulty pressure control solenoid, repairing or replacing damaged wiring or connectors, flushing and refilling transmission fluid, or reprogramming or replacing the TCM if necessary.
7. How much does it cost to repair the P0778 code on a 2016 Toyota RAV4?
Repair costs vary but typically range from $150 to $400 for solenoid replacement, plus additional costs for labor or transmission fluid service if needed.
8. Can low transmission fluid cause the P0778 code?
Yes, low or contaminated transmission fluid can lead to improper solenoid function and trigger the P0778 code.
9. Is the P0778 code specific to the 2016 Toyota RAV4?
No, the P0778 code is a generic OBDII code that can appear in many vehicles, but the specific symptoms and repair steps may vary depending on the make and model.
10. Can a faulty TCM cause the P0778 code in a 2016 Toyota RAV4?
Yes, a malfunctioning transmission control module can fail to properly regulate the solenoid, leading to the P0778 code.
Discuss the causes and fixes for P0778 2016 Toyota RAV4 OBDII Code
Code P0778 2016 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
