AutoCodes – Toyota – P0776 2010 Toyota Camry

P0776 2010 Toyota Camry Code - Pressure Control Solenoid 'B' Performance Valve SL2

Quick Answer

Shifting from 1st to 5th is performed in combination with “ON’ and “OFF operation of the shift solenoid valves SL1, SL2, SL3, S4 and SR which are controlled by the ECM. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty line pressure solenoid valve SL2. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0776 2010 Toyota Camry indicates Pressure Control Solenoid 'B' Performance Valve SL2.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty line pressure solenoid valve SL2.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 7,252

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 10, 2024

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0776 2010 Toyota Camry Description

Shifting from 1st to 5th is performed in combination with “ON’ and “OFF operation of the shift solenoid valves SL1, SL2, SL3, S4 and SR which are controlled by the ECM. If an open or short circuit occurs in either of the shift solenoid valves, the ECM controls the remaining normal shift solenoid valves to allow the vehicle to be operated smoothly (Fail Safe Function).

OBDII Code P0776 2010 Toyota Camry - Pressure Control Solenoid 'B' Performance Valve SL2 - AutoCodes.com — P0776 2010 Toyota Camry Code - Pressure Control Solenoid 'B' Performance Valve SL2

What does this mean?

What are the Possible Causes of the DTC P0776 2010 Toyota Camry?

Low transmission fluid level
Dirty transmission fluid
Faulty line pressure solenoid valve SL2
Line pressure solenoid valve SL2 harness is open or shorted
Line pressure solenoid valve SL2 circuit poor electrical connection
Valve body is blocked

How to Fix the DTC P0776 2010 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When a transmission solenoid is malfunctioned, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is dirty, it's recommended to change the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a mechanical transmission failure and that the transmission will need to be rebuilt or replaced.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0776 2010 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0776 2010 Toyota Camry code?

Need more information on how to fix the P0776 2010 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0776 2010 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0776 2010 Toyota Camry Code

1. What does the OBDII code P0776 mean on a 2010 Toyota Camry?

P0776 indicates a problem with the Pressure Control Solenoid 'B' (Valve SL2) in the transmission, suggesting it is not performing as expected.

2. What are the common symptoms of code P0776 in a 2010 Toyota Camry?

Symptoms include harsh or delayed shifting, transmission slipping, decreased fuel efficiency, or the vehicle going into limp mode.

3. What causes the P0776 code to appear?

Common causes include a faulty pressure control solenoid, low or dirty transmission fluid, clogged passages in the valve body, or electrical issues such as damaged wiring or connectors.

4. Can I drive my 2010 Toyota Camry with a P0776 code?

Driving with this code is not recommended, as it can cause transmission damage or lead to unsafe driving conditions due to shifting problems.

5. How do I diagnose the P0776 code on my Toyota Camry?

Diagnosis involves checking the transmission fluid level and condition, inspecting wiring and connectors to the solenoid, and testing the solenoid's resistance and operation.

6. How do I fix the P0776 code on a 2010 Toyota Camry?

Repairs may include replacing the pressure control solenoid, cleaning or replacing the valve body, repairing damaged wiring, or performing a transmission fluid flush.

7. How much does it cost to fix a P0776 code?

The cost can range from $200 to $1,500 or more, depending on whether the solenoid needs replacement or if more extensive transmission repairs are required.

8. Can low or dirty transmission fluid cause the P0776 code?

Yes, low or contaminated transmission fluid can cause the solenoid to malfunction and trigger this code.

9. Will clearing the P0776 code fix the issue?

Clearing the code will remove it temporarily, but if the underlying problem isnâ€™t resolved, the code will likely return.

10. Do I need to replace the transmission for a P0776 code?

Not necessarily. Many cases can be resolved by replacing the solenoid or addressing fluid and electrical issues, but severe problems may require transmission repair or replacement.