P0770 Dodge Code - 4C Solenoid Circuit
Quick Answer
4C Shift solenoid valve is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty 4C shift solenoid valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0770 Dodge indicates 4C Solenoid Circuit.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty 4C shift solenoid valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0770 Dodge Description
What are the Possible Causes of the DTC P0770 Dodge?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty 4C shift solenoid valve
- 4C Shift solenoid valve harness is open or shorted
- 4C Shift solenoid valve circuit poor electrical connection
How to Fix the DTC P0770 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0770 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0770 Dodge code?
Need more information on how to fix the P0770 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0770 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0770 Dodge Code
1. What does the OBDII code P0770 mean for a Dodge vehicle?
P0770 indicates an issue with the 4C solenoid circuit, which is responsible for controlling gear shifts in the transmission.
2. What are the common symptoms of code P0770 in a Dodge?
Symptoms can include erratic shifting, transmission slipping, loss of power in certain gears, and the check engine light turning on.
3. What causes the P0770 code to appear in a Dodge?
Common causes include a faulty 4C solenoid, damaged wiring or connectors in the solenoid circuit, low transmission fluid, or internal transmission issues.
4. Can driving with a P0770 code damage the transmission?
Yes, prolonged driving with this code can cause further damage to the transmission due to improper gear engagement.
5. How do you diagnose the P0770 code in a Dodge?
Diagnosis typically involves scanning the vehicle with an OBDII tool, inspecting the 4C solenoid and its circuit for damage, and checking transmission fluid levels.
6. How is the P0770 code fixed in a Dodge?
Repairs may include replacing the faulty 4C solenoid, repairing or replacing damaged wiring, and ensuring the transmission fluid is at the correct level.
7. What tools are needed to fix the P0770 code in a Dodge?
You’ll need an OBDII scanner, basic hand tools, wiring repair tools, and potentially a transmission fluid refill kit.
8. Is the P0770 code specific to Dodge vehicles?
No, P0770 is a generic OBDII code that can appear in other makes and models, but the exact solenoid and circuit affected can vary.
9. How much does it cost to repair code P0770 in a Dodge?
Repair costs can range from $200 to $700 depending on whether the solenoid or wiring needs replacement, plus labor costs.
10. Can a transmission fluid change fix the P0770 code on a Dodge?
If the issue is caused by low or contaminated transmission fluid, a fluid change may resolve the problem, but other causes may require more extensive repairs.
Discuss the causes and fixes for P0770 Dodge OBDII Code
-
I have had transmission rebuilt,a loud pack replaced twice, factory recall fixed on shift selector, truck is getting worse now going to limp mode not pulling ,it a 6.7 3500 HELP
-
I am just about sick of A Dodge,it's breaking me, can anyone help I need to use this truck
-
I'm sorry you having problems with your truck and I wish there was something easy you can do, but to properly diagnose the P0770 code you have to remove the transmission pan and access the valve body. If you recently had the transmission rebuilt, I recommend taking the transmission back to them.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
