AutoCodes – Chevrolet – P0762 2015 Chevrolet Silverado

P0762 2015 Chevrolet Silverado Code - Shift Solenoid Valve 3 Performance Stuck On

Quick Answer

The transmission fluid pressure switch, also known as the pressure switch manifold, is a multiple switch assembly made up of 3 normally open pressure switches and 1 normally closed pressure switch. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0762 2015 Chevrolet Silverado indicates Shift Solenoid Valve 3 Performance Stuck On.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 244

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 25, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0762 2015 Chevrolet Silverado Description

The transmission fluid pressure switch, also known as the pressure switch manifold, is a multiple switch assembly made up of 3 normally open pressure switches and 1 normally closed pressure switch. Pressure switch 1 monitor shift valve 1 positioning, pressure switch 2 monitors shift valve 2 positionings, and pressure switch 3 monitors shift valve 3 positionings. The normally open pressure switches 1–3 communicate the positioning to the transmission control module (TCM). The position of shift valves 1–3 is controlled by 3 normally closed shift solenoid valves. When energized, the shift solenoid valves directly control the main pressure to shift valve 1, 2, or 3, which strokes the shift valve. When the valve is stroked, an exhaust passage is blocked and fluid pressure to the pressure switch increases. The Diagnostic Trouble Code (DTC) will be set if the shift solenoid 3 is commanded off and pressure switch 3 remains on for 6–10 s, depending on the transmission fluid temperature.

OBDII Code P0762 2015 Chevrolet Silverado - Shift Solenoid Valve 3 Performance Stuck On - AutoCodes.com — P0762 2015 Chevrolet Silverado Code - Shift Solenoid Valve 3 Performance Stuck On

What does this mean?

What are the Possible Causes of the DTC P0762 2015 Chevrolet Silverado?

Low transmission fluid level
Dirty transmission fluid
Faulty Control Solenoid Valve Assembly
Control Solenoid Valve Assembly harness or connectors
Control Solenoid Valve Assembly circuit is open or shorted
Faulty Transmission Control Module (TCM)

How to Fix the DTC P0762 2015 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0762 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0762 2015 Chevrolet Silverado code?

Need more information on how to fix the P0762 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0762 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0762 2015 Chevrolet Silverado Code

1. What does OBDII code P0762 mean on a 2015 Chevrolet Silverado?

P0762 indicates that the shift solenoid valve 3 in the transmission is stuck in the "on" position, causing improper gear shifting.

2. What are the common symptoms of P0762 in a 2015 Chevrolet Silverado?

Symptoms may include erratic shifting, transmission slipping, inability to shift gears, and illumination of the check engine light.

3. What causes the P0762 code in a 2015 Chevrolet Silverado?

Common causes include a faulty shift solenoid, dirty transmission fluid, electrical issues such as damaged wiring or connectors, or internal transmission problems.

4. Can driving with P0762 damage my 2015 Chevrolet Silverado?

Yes, driving with this code can lead to further transmission damage and reduced performance if not addressed promptly.

5. How do you diagnose P0762 on a 2015 Chevrolet Silverado?

Diagnosis involves scanning for codes, inspecting wiring and connectors, checking transmission fluid condition, and testing the shift solenoid for proper operation.

6. How do you fix P0762 on a 2015 Chevrolet Silverado?

Repairs may include replacing the shift solenoid, flushing or replacing the transmission fluid, repairing wiring issues, or addressing internal transmission damage.

7. How much does it cost to repair P0762 on a 2015 Chevrolet Silverado?

Costs can vary widely, ranging from $150-$500 for solenoid replacement to over $1,000 if major transmission repairs are needed.

8. Can low transmission fluid cause the P0762 code?

Yes, low or dirty transmission fluid can contribute to solenoid malfunctions and trigger the P0762 code.

9. How can I prevent P0762 from occurring in my 2015 Chevrolet Silverado?

Regular maintenance, such as transmission fluid changes and inspections, can help prevent solenoid issues and keep the transmission functioning properly.

10. Do I need to replace the entire transmission for the P0762 code?

Not necessarily; many cases can be resolved by replacing the shift solenoid or addressing related issues without replacing the entire transmission.