AutoCodes – Chevrolet – P0761 2018 Chevrolet Silverado

P0761 2018 Chevrolet Silverado Code - Shift Solenoid Valve 3 Performance Stuck Off

Quick Answer

The transmission fluid pressure switch, also known as the pressure switch manifold, is a multiple switch assembly made up of 3 normally open pressure switches and 1 normally closed pressure switch. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0761 2018 Chevrolet Silverado indicates Shift Solenoid Valve 3 Performance Stuck Off.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 313

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 25, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0761 2018 Chevrolet Silverado Description

The transmission fluid pressure switch, also known as the pressure switch manifold, is a multiple switch assembly made up of 3 normally open pressure switches and 1 normally closed pressure switch. Pressure switch 1 monitor shift valve 1 positioning, pressure switch 2 monitors shift valve 2 positioning and pressure switch 3 monitors shift valve 3 positionings. The normally open pressure switches 1–3 communicate the positioning to the Transmission Control Module (TCM). The position of shift valves 1–3 is controlled by 3 normally closed shift solenoid valves 1–3. When energized, the shift solenoid valves directly control the main pressure to shift valve 1, 2, or 3, which strokes the shift valve. When the shift valve is stroked, an exhaust passage is blocked and fluid pressure to the pressure switch increases. The Diagnostic Trouble Code (DTC) will be set if the shift solenoid valve 3 is commanded on and pressure switch 3 remains off for 5–12 s, depending on the transmission fluid temperature.

OBDII Code P0761 2018 Chevrolet Silverado - Shift Solenoid Valve 3 Performance Stuck Off - AutoCodes.com — P0761 2018 Chevrolet Silverado Code - Shift Solenoid Valve 3 Performance Stuck Off

What does this mean?

What are the Possible Causes of the DTC P0761 2018 Chevrolet Silverado?

Low transmission fluid level
Dirty transmission fluid
Faulty Control Solenoid Valve Assembly
Control Solenoid Valve Assembly harness or connectors
Control Solenoid Valve Assembly circuit is open or shorted
Faulty Transmission Control Module (TCM)

How to Fix the DTC P0761 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0761 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0761 2018 Chevrolet Silverado code?

Need more information on how to fix the P0761 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0761 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0761 2018 Chevrolet Silverado Code

1. What does the OBDII code P0761 mean for a 2018 Chevrolet Silverado?

P0761 indicates a problem with Shift Solenoid Valve 3, typically due to it being stuck in the "off" position or performing poorly.

2. What are the common symptoms of code P0761 in a 2018 Chevrolet Silverado?

Symptoms may include delayed or harsh shifting, inability to shift into certain gears, transmission slipping, and an illuminated check engine light.

3. What causes code P0761 on a 2018 Chevrolet Silverado?

Possible causes include a malfunctioning shift solenoid, low or dirty transmission fluid, wiring issues, or internal transmission problems.

4. Can driving with code P0761 damage my 2018 Chevrolet Silverado?

Yes, driving with this code can lead to further transmission damage or unsafe driving conditions due to improper gear shifts.

5. How do I diagnose code P0761 on my 2018 Chevrolet Silverado?

Diagnosis involves checking the transmission fluid condition, inspecting wiring and connectors, testing the shift solenoid, and possibly performing a transmission pressure test.

6. How do I fix code P0761 on a 2018 Chevrolet Silverado?

Repairs may include replacing the shift solenoid, cleaning or refilling transmission fluid, repairing wiring issues, or addressing internal transmission faults.

7. How much does it cost to fix code P0761 on a 2018 Chevrolet Silverado?

Repair costs vary depending on the issue but can range from $100 for fluid replacement to over $1,000 for internal transmission repairs.

8. Can code P0761 be caused by a low transmission fluid level?

Yes, low or dirty transmission fluid can cause the shift solenoid to malfunction, leading to code P0761.

9. Do I need to replace the transmission for code P0761 in a 2018 Chevrolet Silverado?

Not always. Many cases are resolved by replacing the shift solenoid or fixing wiring issues, though severe internal damage may necessitate transmission replacement.

10. Can a bad shift solenoid cause code P0761?

Yes, a faulty or stuck shift solenoid is one of the most common causes of code P0761.