P0761 2014 GMC Sierra Code - Shift Solenoid Valve 3 Performance Stuck Off
Quick Answer
The transmission fluid pressure switch, also known as the pressure switch manifold, is a multiple switch assembly made up of 3 normally open pressure switches and 1 normally closed pressure switch. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0761 2014 GMC Sierra indicates Shift Solenoid Valve 3 Performance Stuck Off.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0761 2014 GMC Sierra Description
What are the Possible Causes of the DTC P0761 2014 GMC Sierra?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Control Solenoid Valve Assembly
- Control Solenoid Valve Assembly harness or connectors
- Control Solenoid Valve Assembly circuit is open or shorted
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P0761 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0761 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0761 2014 GMC Sierra code?
Need more information on how to fix the P0761 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0761 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0761 2014 GMC Sierra Code
What does the OBDII code P0761 mean for a 2014 GMC Sierra?
P0761 indicates that the Shift Solenoid Valve 3 is not functioning properly, often stuck in the "off" position, causing issues with transmission performance.
What are the common symptoms of code P0761 in a 2014 GMC Sierra?
Symptoms include erratic shifting, delayed gear engagement, poor fuel efficiency, and the Check Engine Light turning on.
What causes the P0761 code in a 2014 GMC Sierra?
Common causes include a malfunctioning shift solenoid, transmission fluid issues, wiring problems, or a faulty transmission control module (TCM).
Can driving with code P0761 damage the transmission?
Yes, driving with this code can lead to further transmission damage or wear if not addressed promptly.
How can I diagnose the P0761 code in my 2014 GMC Sierra?
Use a scan tool to confirm the code, inspect the wiring and connectors, check the transmission fluid condition, and test the solenoid for proper operation.
What repair options are available for code P0761?
Repairs may include replacing the shift solenoid, repairing damaged wiring, flushing or replacing transmission fluid, or reprogramming the TCM.
Do I need to replace the transmission for code P0761 on a 2014 GMC Sierra?
In most cases, the transmission does not need replacement, as the issue is usually related to the solenoid or electrical components.
How much does it cost to repair code P0761 on a 2014 GMC Sierra?
Repair costs can vary from $200 to $600, depending on whether the solenoid or other components need replacement.
Can low transmission fluid cause the P0761 code?
Yes, low or degraded transmission fluid can cause the solenoid to malfunction and trigger the P0761 code.
What maintenance can prevent the P0761 code from occurring?
Regular transmission fluid changes, inspecting wiring for damage, and ensuring the solenoids are functioning properly can help prevent this code.
Discuss the causes and fixes for P0761 2014 GMC Sierra OBDII Code
Code P0761 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
