P0760 BMW Code - Shift Solenoid 'C' Malfunction
Quick Answer
Shift solenoid valve 'C' is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shift solenoid 'C' valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0760 BMW indicates Shift Solenoid 'C' Malfunction.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shift solenoid 'C' valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0760 BMW Description
What are the Possible Causes of the DTC P0760 BMW?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid 'C' valve
- Shift solenoid 'C' valve harness or connectors
- Shift solenoid 'C' valve circuit is open or shorted
How to Fix the DTC P0760 BMW?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0760 BMW code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0760 BMW code?
Need more information on how to fix the P0760 BMW code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0760 BMW code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0760 BMW Code
1. What does the OBDII code P0760 mean on a BMW?
The P0760 code indicates a malfunction in the Shift Solenoid 'C,' which is responsible for controlling the flow of transmission fluid to engage specific gears.
2. What are the common symptoms of code P0760 on a BMW?
Symptoms include erratic shifting, failure to shift into certain gears, transmission slipping, reduced fuel efficiency, and the illumination of the check engine light.
3. What causes the P0760 code to appear on a BMW?
Common causes include a faulty shift solenoid 'C,' damaged wiring or connectors, low or dirty transmission fluid, or internal transmission issues.
4. Can driving with the P0760 code cause further damage?
Yes, driving with this code can lead to further transmission damage, reduced performance, and increased repair costs if not addressed promptly.
5. How is the P0760 code diagnosed on a BMW?
Diagnosis involves scanning the vehicle with an OBDII scanner, inspecting the shift solenoid and its wiring for damage, and checking the transmission fluid level and condition.
6. How do you fix the P0760 code on a BMW?
Repairs may include replacing the faulty shift solenoid 'C,' repairing damaged wiring, cleaning or replacing transmission fluid, or addressing internal transmission problems.
7. Is the P0760 code specific to BMW vehicles?
No, the P0760 code is a generic OBDII code applicable to many vehicles, but diagnostics and repairs may vary depending on the make and model.
8. How much does it cost to fix the P0760 code on a BMW?
The cost can range from $150 to $400 for a solenoid replacement but may be higher if internal transmission repairs are needed.
9. Can low transmission fluid cause the P0760 code on a BMW?
Yes, low or dirty transmission fluid can affect solenoid operation and trigger the P0760 code.
10. Do I need to replace the entire transmission if the P0760 code appears?
Not necessarily. In most cases, the issue can be resolved by repairing or replacing the shift solenoid or addressing related components.
Discuss the causes and fixes for P0760 BMW OBDII Code
Code P0760 BMW comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
