P0760 2005 Nissan Altima Sedan Code - Shift Solenoid Valve 'C' Malfunction
Quick Answer
Shift solenoid valve 'C' is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shift solenoid 'C' valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0760 2005 Nissan Altima Sedan indicates Shift Solenoid Valve 'C' Malfunction.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shift solenoid 'C' valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0760 2005 Nissan Altima Sedan Description
What are the Possible Causes of the DTC P0760 2005 Nissan Altima Sedan?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid 'C' valve
- Shift solenoid 'C' valve harness or connectors
- Shift solenoid 'C' valve circuit is open or shorted
How to Fix the DTC P0760 2005 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0760 2005 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0760 2005 Nissan Altima Sedan code?
Need more information on how to fix the P0760 2005 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0760 2005 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0760 2005 Nissan Altima Sedan Code
1. What does the OBDII code P0760 mean on a 2005 Nissan Altima Sedan?
P0760 indicates a malfunction in Shift Solenoid Valve 'C,' which controls gear shifting in the transmission.
2. What are the common symptoms of the P0760 code in a 2005 Nissan Altima?
Symptoms may include harsh or delayed shifting, transmission stuck in one gear, poor fuel economy, or the Check Engine Light turning on.
3. What causes the P0760 code in a 2005 Nissan Altima?
Common causes include a faulty shift solenoid 'C,' damaged wiring or connectors, low transmission fluid, or a malfunctioning transmission control module (TCM).
4. Can I drive my 2005 Nissan Altima with the P0760 code?
It’s not advised to drive with this code active, as it can lead to further transmission damage and unsafe driving conditions.
5. How do I fix the P0760 code on a 2005 Nissan Altima?
Repairs may include replacing the shift solenoid 'C,' repairing damaged wiring, topping off or replacing the transmission fluid, or reprogramming the TCM.
6. How much does it cost to repair the P0760 code in a 2005 Nissan Altima?
Repair costs vary but may range from $150 to $400 for a shift solenoid replacement, plus additional diagnostic or labor fees.
7. How do I diagnose the P0760 code in my 2005 Nissan Altima?
Diagnosis involves scanning the vehicle with an OBDII tool, inspecting the wiring and connectors, checking the transmission fluid level, and testing the shift solenoid.
8. Can low transmission fluid cause the P0760 code in my 2005 Nissan Altima?
Yes, low or dirty transmission fluid can cause improper solenoid operation and trigger the P0760 code.
9. Does the P0760 code mean I need a new transmission?
Not necessarily. In most cases, the issue can be resolved by repairing or replacing the shift solenoid or related components.
10. What tools are needed to fix the P0760 code in a 2005 Nissan Altima?
Basic tools include an OBDII scanner, multimeter, and transmission fluid tools. Advanced repairs may require professional equipment.
Discuss the causes and fixes for P0760 2005 Nissan Altima Sedan OBDII Code
Code P0760 2005 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
