P0750 Hyundai Code - Shift Control Solenoid Valve 'A'
Quick Answer
Shift solenoid valve 'A is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shift solenoid 'A' valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0750 Hyundai indicates Shift Control Solenoid Valve 'A'.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shift solenoid 'A' valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0750 Hyundai Description
What are the Possible Causes of the DTC P0750 Hyundai?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid 'A' valve
- Shift solenoid 'A' valve harness or connectors
- Shift solenoid 'A' valve circuit is open or shorted
How to Fix the DTC P0750 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0750 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0750 Hyundai code?
Need more information on how to fix the P0750 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0750 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0750 Hyundai Code
1. What does the OBDII code P0750 mean on a Hyundai?
P0750 indicates a problem with the Shift Control Solenoid Valve 'A', which is responsible for controlling gear shifts within the transmission.
2. What are the symptoms of the P0750 code in a Hyundai?
Common symptoms include difficulty shifting gears, transmission slipping, poor fuel economy, the transmission being stuck in one gear, and the check engine light turning on.
3. What causes the P0750 code on a Hyundai?
The P0750 code can be caused by a faulty shift solenoid, wiring issues, a damaged transmission control module (TCM), low or dirty transmission fluid, or internal transmission failure.
4. Can I drive my Hyundai with a P0750 code?
Driving with a P0750 code is not recommended, as it can lead to further transmission damage or unsafe driving conditions due to improper gear shifting.
5. How do I diagnose the P0750 code on a Hyundai?
Start by checking the transmission fluid level and condition. Then inspect the wiring and connectors for damage. Use a scan tool to test the functionality of the shift solenoid and the TCM.
6. How do I fix the P0750 code on a Hyundai?
Depending on the cause, repairs may include replacing the faulty shift solenoid, repairing damaged wiring, cleaning or replacing transmission fluid, or reprogramming the TCM.
7. How much does it cost to fix the P0750 code on a Hyundai?
Repair costs can range from $150 to $400 for solenoid replacement but may be higher if transmission fluid service or TCM repair is needed.
8. Can low transmission fluid cause the P0750 code on a Hyundai?
Yes, low or dirty transmission fluid can cause the solenoid to malfunction, leading to the P0750 code.
9. How can I prevent the P0750 code on my Hyundai?
Regularly check and change the transmission fluid, inspect wiring for damage, and address any transmission issues promptly to prevent solenoid failure.
10. Does the P0750 code always mean the shift solenoid is bad?
Not necessarily. The issue could also stem from wiring problems, a faulty TCM, or issues within the transmission itself. Proper diagnosis is required.
Discuss the causes and fixes for P0750 Hyundai OBDII Code
-
2002 hundia sonota no spark won't start. Was driving came toa stop then started in motion and she just quit and won't restart.
Codes p0750, P0445.
Tested crank sensor checked for spark found none checked fuel injectors had pulses (wow confused! -
Anyone actually successfully repaired/solved the P0750 code? I'm getting it on my 2010 Accent, but it's driving/shifting just fine.
-
Have you tried clearing the code? How is the transmission fluid level and condition?
The P0750 code is for the shift solenoid, it's possible that the solenoid got temporarily stuck and set the code.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
