AutoCodes – BMW – P0750 BMW

P0750 BMW Code - Shift Solenoid 'A' Malfunction

Quick Answer

Shift solenoid valve A is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shift solenoid 'A' valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0750 BMW indicates Shift Solenoid 'A' Malfunction.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty shift solenoid 'A' valve.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 10,316

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 08, 2019

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0750 BMW Description

OBDII Code P0750 BMW - Shift Solenoid 'A' Malfunction - AutoCodes.com — P0750 BMW Code - Shift Solenoid 'A' Malfunction

What does this mean?

What are the Possible Causes of the DTC P0750 BMW?

Low transmission fluid level
Dirty transmission fluid
Faulty shift solenoid 'A' valve
Shift solenoid 'A' valve harness or connectors
Shift solenoid 'A' valve circuit is open or shorted

How to Fix the DTC P0750 BMW?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When the a transmission solenoid is malfunction, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is very dirty, it is recommend changing the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a transmission mechanical failure and that the transmission will need to be rebuilt or replaced.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0750 BMW code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0750 BMW code?

Need more information on how to fix the P0750 BMW code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0750 BMW code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0750 BMW Code

1. What does the OBDII code P0750 mean on a BMW?

P0750 indicates a malfunction in the Shift Solenoid 'A' circuit, which is responsible for controlling gear shifts in the transmission.

2. What are the common symptoms of the P0750 code on a BMW?

Symptoms include difficulty shifting gears, transmission stuck in one gear, poor acceleration, reduced fuel efficiency, and the Check Engine Light turning on.

3. What causes the P0750 code in a BMW?

Common causes include a faulty shift solenoid, damaged wiring or connectors in the solenoid circuit, low transmission fluid, or a malfunction in the transmission control module (TCM).

4. Can driving with the P0750 code damage my BMW?

Yes, continuing to drive with this code can lead to further transmission damage, reduced performance, and potentially costly repairs if not addressed promptly.

5. How do I diagnose the P0750 code on my BMW?

Diagnosis involves scanning the vehicle with an OBDII scanner, inspecting the shift solenoid and its wiring, checking the transmission fluid level and condition, and testing the TCM functionality.

6. How do I fix the P0750 code in a BMW?

Repairs may include replacing the faulty shift solenoid, repairing or replacing damaged wiring or connectors, flushing and refilling transmission fluid, or reprogramming/replacing the TCM.

7. Is the P0750 code specific to BMW vehicles?

No, P0750 is a generic OBDII code applicable to all OBDII-equipped vehicles, but the diagnosis and repair process may vary between manufacturers.

8. How much does it cost to fix a P0750 code on a BMW?

Repair costs vary depending on the issue. Replacing a shift solenoid typically costs $200-$400, while more complex repairs like TCM replacement can cost $800 or more.

9. Can low transmission fluid cause the P0750 code on a BMW?

Yes, low or contaminated transmission fluid can cause improper solenoid operation, triggering the P0750 code.

10. Do I need a professional mechanic to fix the P0750 code on my BMW?

While some issues, like checking transmission fluid, can be done at home, diagnosing and repairing electrical components or the TCM often requires professional expertise.