AutoCodes – Pontiac – P0748 Pontiac

P0748 Pontiac Code - Pressure Control Solenoid Circuit Electrical

Quick Answer

The Pressure Control (PC) solenoid valve is an electronic device that regulates transmission line pressure based on the current flow through its coil winding. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0748 Pontiac indicates Pressure Control Solenoid Circuit Electrical.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 9,577

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 29, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0748 Pontiac Description

The Pressure Control (PC) solenoid valve is an electronic device that regulates transmission line pressure based on the current flow through its coil winding. The magnetic field produced by the coil moves the solenoid's internal valve which varies pressure to the pressure regulator valve. The Powertrain Control Module (PCM) controls the PC solenoid valve by applying a varying amount of amperage to the solenoid. The applied amperage can vary from 0.1 to 1.1 amps. Low amperage (0.1 amp) indicates high line pressure. High amperage (1.1 amps) indicates low line pressure. The duty cycle of the PC solenoid valve is expressed as a percentage of energized ON time. Zero percent indicates zero ON time (non-energized) or no current flow. Approximately 60% at idle indicates maximum ON time (energized) or high current flow. The PCM determines the appropriate line pressure for a given load by comparing the throttle position (TP) voltage, the engine speed and other inputs.

OBDII Code P0748 Pontiac - Pressure Control Solenoid Circuit Electrical - AutoCodes.com — P0748 Pontiac Code - Pressure Control Solenoid Circuit Electrical

What does this mean?

What are the Possible Causes of the DTC P0748 Pontiac?

Low transmission fluid level
Dirty transmission fluid
Faulty Pressure Control Solenoid
Pressure Control Solenoid harness is open or shorted
Pressure Control Solenoid circuit poor electrical connection

How to Fix the DTC P0748 Pontiac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When a transmission solenoid is malfunctioned, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is dirty, it's recommended to change the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a mechanical transmission failure and that the transmission will need to be rebuilt or replaced.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0748 Pontiac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0748 Pontiac code?

Need more information on how to fix the P0748 Pontiac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0748 Pontiac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0748 Pontiac Code

1. What are the common symptoms of OBDII code P0748 in a Pontiac related to the Pressure Control Solenoid Circuit Electrical?

- Common symptoms include harsh shifting, transmission slippage, poor fuel economy, and the illumination of the Check Engine Light.

2. What are the possible causes of OBDII code P0748 in a Pontiac?

- The code P0748 in a Pontiac can be triggered by issues such as a faulty pressure control solenoid, damaged wiring or connectors, low transmission fluid levels, or a malfunctioning transmission control module.

3. How can I diagnose the OBDII code P0748 in my Pontiac?

- Diagnosis typically involves using an OBDII scanner to retrieve the trouble code, inspecting the transmission fluid level and condition, conducting a visual inspection of wiring and connectors, and testing the pressure control solenoid for proper operation.

4. What are the repair options for OBDII code P0748 in a Pontiac?

- Repair options may include replacing the pressure control solenoid, repairing or replacing damaged wiring or connectors, topping up or replacing transmission fluid, or reprogramming the transmission control module.

5. Can I continue driving my Pontiac with OBDII code P0748?

- It is not recommended to continue driving your Pontiac with OBDII code P0748, as it can lead to further damage to the transmission and potentially result in costly repairs.

6. How much does it cost to repair OBDII code P0748 in a Pontiac?

- The cost of repairing OBDII code P0748 in a Pontiac can vary depending on the extent of the issue, the parts needed, and labor costs. It is advisable to consult a professional mechanic for an accurate estimate.

7. Are there any preventive maintenance tips to avoid OBDII code P0748 in a Pontiac?

- Regularly checking and maintaining proper transmission fluid levels, addressing any transmission issues promptly, and ensuring all electrical connections are secure can help prevent OBDII code P0748 in a Pontiac.

8. Can a DIY enthusiast fix OBDII code P0748 in a Pontiac?

- While some DIY enthusiasts may have the skills to address simple transmission and electrical issues, diagnosing and repairing OBDII code P0748 may require specialized tools and expertise. It is recommended to seek professional help for this type of repair.

9. Will OBDII code P0748 cause permanent damage to my Pontiac's transmission?

- Ignoring OBDII code P0748 can potentially cause permanent damage to your Pontiac's transmission if the underlying issue is not addressed promptly. It is crucial to address the problem as soon as possible to prevent further damage.

10. How long does it take to repair OBDII code P0748 in a Pontiac?

- The duration of the repair for OBDII code P0748 in a Pontiac can vary depending on the specific issue and the availability of parts. It is advisable to consult with a professional mechanic to get an estimate of the repair time.