P0748 2017 Toyota RAV4 Code - Pressure Control Solenoid 'A' Electrical
Quick Answer
Changing from 1st to 6th is performed by the Engine Control Module (ECM) turning shift solenoid valves SL1, SL2, SL3, SL4, and SL on and off. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'A' valve (Shift Solenoid Valve SL1). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0748 2017 Toyota RAV4 indicates Pressure Control Solenoid 'A' Electrical.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'A' valve (Shift Solenoid Valve SL1).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0748 2017 Toyota RAV4 Description
This Diagnostic Trouble Code (DTC) indicates an open or short in the shift solenoid valve SL1 circuit. The ECM commands gear shifts by turning the shift solenoid valves on or off. When there is an open or short circuit in any shift solenoid valve circuit, the ECM detects the problem and illuminates the MIL, and stores the DTC. The ECM also performs the fail-safe function and turns the other normal shift solenoid valves on or off. (In case of an open or short circuit, the ECM stops sending current to the circuit.)
While driving and shifting between the 4th and 5th gears, if the ECM detects an open or short in the shift solenoid valve SL1 circuit, the ECM determines there is a malfunction.
What are the Possible Causes of the DTC P0748 2017 Toyota RAV4?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Pressure Control Solenoid 'A' valve (Shift Solenoid Valve SL1)
- Pressure Control Solenoid 'A' valve harness is open or shorted
- Pressure Control Solenoid 'A' valve circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0748 2017 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0748 2017 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0748 2017 Toyota RAV4 code?
Need more information on how to fix the P0748 2017 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0748 2017 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0748 2017 Toyota RAV4 Code
1. What does the OBDII code P0748 mean for a 2017 Toyota RAV4?
It indicates an electrical fault in Pressure Control Solenoid 'A,' which helps regulate hydraulic pressure in the transmission.
2. What are the common symptoms of a P0748 code?
Symptoms may include rough shifting, transmission slipping, reduced fuel efficiency, or the vehicle entering limp mode.
3. What causes the P0748 code to appear in a 2017 Toyota RAV4?
Common causes include a faulty pressure control solenoid, damaged wiring or connectors, a failing transmission control module (TCM), or dirty transmission fluid.
4. Can I drive my 2017 Toyota RAV4 with a P0748 code?
Driving is possible but not recommended, as it can cause further damage to the transmission and reduce vehicle performance.
5. How do I diagnose the P0748 code?
Diagnosis involves inspecting the transmission wiring and connectors, testing the pressure control solenoid, and scanning the TCM for additional codes.
6. How can I fix the P0748 code on my Toyota RAV4?
Repairs may include replacing the faulty solenoid, repairing or replacing damaged wiring, cleaning or replacing the transmission fluid, or reprogramming the TCM.
7. How much does it cost to repair a P0748 code?
Costs vary depending on the issue but typically range from $150 to $400 for solenoid repair or replacement, plus labor.
8. Can low transmission fluid cause the P0748 code?
Yes, insufficient or dirty transmission fluid can cause solenoid malfunctions and trigger this code.
9. Does P0748 always mean the solenoid is bad?
Not necessarily; it can also result from electrical issues like damaged wiring or a malfunctioning TCM.
10. Will clearing the P0748 code with a scan tool fix the problem?
Clearing the code may temporarily turn off the check engine light, but the underlying issue must be repaired to prevent the code from returning.
Discuss the causes and fixes for P0748 2017 Toyota RAV4 OBDII Code
Code P0748 2017 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
