AutoCodesGMC – P0747 2016 GMC Sierra

P0747 2016 GMC Sierra Code - Transmission Control Solenoid Valve 1 Stuck On

Quick Answer

The solenoid actuator controls fluid pressure by moving the clutch 1-2-3-4-5-6 regulator valve that controls the fluid pressure to the 1-2-3-4-5-6 clutch. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0747 2016 GMC Sierra indicates Transmission Control Solenoid Valve 1 Stuck On.
Common causes
Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 210
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jul 30, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0747 2016 GMC Sierra Description

The solenoid actuator controls fluid pressure by moving the clutch 1-2-3-4-5-6 regulator valve that controls the fluid pressure to the 1-2-3-4-5-6 clutch. The Solenoid Valve is an electronic pressure actuator that controls transmission line pressure based on current flow through its coil windings. As current flow is increased, the magnetic field produced by the coil moves the solenoid’s plunger further away from the exhaust port. Opening the exhaust port decreases the output fluid pressure regulated by the solenoid valve, which ultimately decreases line pressure.
OBDII Code P0747 2016 GMC Sierra - Transmission Control Solenoid Valve 1 Stuck On - AutoCodes.com
P0747 2016 GMC Sierra Code - Transmission Control Solenoid Valve 1 Stuck On

What are the Possible Causes of the DTC P0747 2016 GMC Sierra?

  • Low transmission fluid level
  • Dirty transmission fluid
  • Faulty Transmission Control Solenoid Valve
  • Transmission Control Solenoid Valve harness is open or shorted
  • Transmission Control Solenoid Valve circuit poor electrical connection

How to Fix the DTC P0747 2016 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0747 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0747 2016 GMC Sierra code?

Need more information on how to fix the P0747 2016 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0747 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0747 2016 GMC Sierra Code

1. What does the OBDII code P0747 mean on a 2016 GMC Sierra?

P0747 indicates that the Transmission Control Solenoid Valve 1 is stuck in the "on" position, which can lead to improper transmission operation.

2. What are the common symptoms of code P0747 in a 2016 GMC Sierra?

Symptoms may include harsh shifting, slipping transmission, inability to change gears, reduced fuel efficiency, and activation of the check engine light.

3. What causes the P0747 code to trigger on a 2016 GMC Sierra?

Potential causes include a faulty transmission control solenoid, low or dirty transmission fluid, wiring issues, or internal transmission damage.

4. Can I drive my 2016 GMC Sierra with a P0747 code active?

Driving with a P0747 code is not recommended, as it can lead to further transmission damage or unsafe driving conditions.

5. How can I diagnose the P0747 code on my 2016 GMC Sierra?

Diagnosis involves scanning for codes, inspecting the transmission fluid, checking the solenoid’s electrical connections, and testing the solenoid for proper operation.

6. What is the cost to repair a P0747 code in a 2016 GMC Sierra?

Repair costs can vary widely, from $150 to $400 for a solenoid replacement, but may be higher if internal transmission repairs are needed.

7. Can dirty transmission fluid cause the P0747 code on a 2016 GMC Sierra?

Yes, dirty or contaminated transmission fluid can cause the solenoid to stick or malfunction, leading to a P0747 code.

8. How do I fix the P0747 code on my 2016 GMC Sierra?

Fixes may include replacing the faulty solenoid, cleaning or replacing the transmission fluid, repairing damaged wiring, or addressing internal transmission issues.

9. What tools are needed to troubleshoot the P0747 code on a 2016 GMC Sierra?

You may need an OBDII scanner, a multimeter for electrical testing, and basic tools for inspecting and replacing transmission components.

10. Can a P0747 code be caused by a faulty transmission control module (TCM)?

While rare, a malfunctioning TCM can contribute to a P0747 code if it fails to properly control the solenoid’s operation.

Discuss the causes and fixes for P0747 2016 GMC Sierra OBDII Code

Code P0747 2016 GMC Sierra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play