AutoCodes – Acura – P0746 Acura

P0746 Acura Code - Clutch Pressure Control Solenoid Valve 'A' Stuck Off

Quick Answer

The Pressure Control (PC) Solenoid Valve is an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty line pressure solenoid valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0746 Acura indicates Clutch Pressure Control Solenoid Valve 'A' Stuck Off.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty line pressure solenoid valve.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 19,618

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 02, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0746 Acura Description

The Pressure Control (PC) Solenoid Valve is an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. As current flow is increased, the magnetic field produced by the coil moves the solenoid’s plunger further away from the exhaust port. Opening the exhaust port decreases the output fluid pressure regulated by the PC solenoid valve, which ultimately decreases line pressure. The line pressure solenoid valve regulates the oil pump discharge pressure to suit the driving condition in response to a signal sent from the Transmission Control Module (TCM). The Diagnostic Trouble Code (DTC) will be set when the gear required by the Engine Control Module (ECM) does not match the actual gear when driving.

OBDII Code P0746 Acura - Clutch Pressure Control Solenoid Valve 'A' Stuck Off - AutoCodes.com — P0746 Acura Code - Clutch Pressure Control Solenoid Valve 'A' Stuck Off

What does this mean?

What are the Possible Causes of the DTC P0746 Acura?

Low transmission fluid level
Dirty transmission fluid
Faulty line pressure solenoid valve
Line pressure solenoid valve harness is open or shorted
Line pressure solenoid valve circuit poor electrical connection

How to Fix the DTC P0746 Acura?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When a transmission solenoid has malfunctioned, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is dirty, it's recommended to change the transmission fluid and if possible, remove the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a mechanical transmission failure, and that the transmission will need to be rebuilt or replaced.

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0746 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0746 Acura code?

Need more information on how to fix the P0746 Acura code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0746 Acura code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0746 Acura Code

What does the OBDII code P0746 mean on an Acura?

P0746 indicates that the Clutch Pressure Control Solenoid Valve 'A' is stuck off, meaning it is not properly regulating hydraulic pressure in the transmission.

What are the common symptoms of code P0746 in an Acura?

Symptoms may include harsh or delayed shifting, transmission slipping, poor fuel economy, or the vehicle going into limp mode.

What causes the P0746 code to appear on an Acura?

Common causes include a faulty solenoid, low or dirty transmission fluid, internal transmission blockages, wiring issues, or a failing transmission control module (TCM).

Can I drive my Acura with a P0746 code?

Driving with a P0746 code is not recommended as it can cause further transmission damage and result in unsafe driving conditions.

How do I diagnose the P0746 code on my Acura?

Diagnosis typically involves scanning for codes, inspecting the solenoid and related wiring, checking the transmission fluid level and condition, and testing hydraulic pressure.

What is the cost to repair the P0746 code on an Acura?

Repair costs vary but may include $100–$300 for a solenoid replacement or significantly more if internal transmission repairs are needed.

Can dirty transmission fluid cause the P0746 code?

Yes, dirty or contaminated transmission fluid can restrict solenoid operation and cause the P0746 code to trigger.

How is the Clutch Pressure Control Solenoid Valve 'A' replaced on an Acura?

The process involves draining the transmission fluid, accessing the solenoid inside the transmission, replacing it, and refilling with new fluid.

Does clearing the P0746 code fix the issue?

Clearing the code without addressing the root cause will not fix the problem, and the code is likely to return.

Can a failing TCM cause the P0746 code on an Acura?

Yes, a failing Transmission Control Module can send incorrect signals to the solenoid, causing the P0746 code to appear.

Discuss the causes and fixes for P0746 Acura OBDII Code

Submit a New Comment

Matt
Date: August 20, 2017 at 2:31 pm

I am having issues with this.. have clean the (pcs) flushed 2 times and cleaned every other deal on the transmission I could find, it started going into second gear finally but when it comes to grab 3rd gear it looses all them an will go to first when down to idle after 3rd fail.. thinking of flushing maybe 2 more times?

Reply to Comment