P0744 2005 Nissan Altima Sedan Code - Torque Converter Clutch Circuit Intermittent
Quick Answer
The Torque Converter Clutch (TCC) solenoid valve is activated, with the gear in D4, by the Transmission Control Module (TCM) in response to signals sent from the vehicle speed and the Engine Control Module (ECM). Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Torque Converter Clutch (TCC) Solenoid Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0744 2005 Nissan Altima Sedan indicates Torque Converter Clutch Circuit Intermittent.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Torque Converter Clutch (TCC) Solenoid Valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0744 2005 Nissan Altima Sedan Description
The lock-up operation, however, is prohibited when A/T fluid temperature is too low.
When the accelerator pedal is depressed (less than 2/8) in lock-up conditions, the engine speed should not change abruptly. If there is a big jump in engine speed, there is no lock-up.
The Diagnostic Trouble Code (DTC) P0744 is detected when A/T cannot perform lock-up even if the electrical circuit is good.
What are the Possible Causes of the DTC P0744 2005 Nissan Altima Sedan?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Torque Converter Clutch (TCC) Solenoid Valve
- Torque Converter Clutch Solenoid Valve harness is open or shorted
- Torque Converter Clutch Solenoid Valve circuit poor electrical connection
How to Fix the DTC P0744 2005 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0744 2005 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0744 2005 Nissan Altima Sedan code?
Need more information on how to fix the P0744 2005 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0744 2005 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0744 2005 Nissan Altima Sedan Code
1. What are the common symptoms of OBDII code P0744 on a 2005 Nissan Altima Sedan?
- Common symptoms include engine stalling at stops, difficulty shifting gears, and decreased fuel efficiency.
2. What can cause the Torque Converter Clutch Circuit Intermittent issue in a 2005 Nissan Altima Sedan?
- Possible causes include a faulty torque converter clutch solenoid, wiring issues, low transmission fluid, or a malfunctioning PCM.
3. How serious is OBDII code P0744 in a 2005 Nissan Altima Sedan?
- Ignoring this code can lead to further transmission damage and potential safety hazards. It is recommended to address the issue promptly.
4. Can I continue to drive my 2005 Nissan Altima Sedan with OBDII code P0744?
- It is not advisable to drive the vehicle with this code present, as it can cause further damage to the transmission and may lead to unsafe driving conditions.
5. How can I diagnose the Torque Converter Clutch Circuit Intermittent problem in my 2005 Nissan Altima Sedan?
- Diagnosing the issue typically involves using a professional OBDII scanner to read the code, checking the transmission fluid level, and inspecting the torque converter clutch solenoid and wiring.
6. Is it possible to repair OBDII code P0744 on a 2005 Nissan Altima Sedan without professional help?
- While some DIY enthusiasts may attempt to address the issue, it is recommended to consult a qualified mechanic for accurate diagnosis and repair to ensure the problem is resolved correctly.
7. How much does it cost to fix the Torque Converter Clutch Circuit Intermittent issue in a 2005 Nissan Altima Sedan?
- The cost of repair can vary depending on the exact cause of the problem, but it typically ranges from $300 to $800, including parts and labor.
8. Can resetting the OBDII code P0744 on a 2005 Nissan Altima Sedan fix the issue temporarily?
- Resetting the code may temporarily clear the warning light, but it will not resolve the underlying problem causing the Torque Converter Clutch Circuit Intermittent issue.
9. What steps should I take if OBDII code P0744 keeps coming back on my 2005 Nissan Altima Sedan?
- If the code keeps reappearing after clearing it, it is crucial to have a professional mechanic thoroughly inspect the transmission system for a more in-depth diagnosis and repair.
10. Is the Torque Converter Clutch Circuit Intermittent problem a common issue in 2005 Nissan Altima Sedans?
- While not extremely common, this issue can occur in 2005 Nissan Altima Sedans due to various factors such as age, mileage, and maintenance history.
Discuss the causes and fixes for P0744 2005 Nissan Altima Sedan OBDII Code
-
P0744 auto trans tork convertor function solenoid value function
2 torque converter clutch circuit intermediateIs my transmission completely gone than
-
No necessarily. The only way to know exactly is by performing some tests and inspecting the condition of the transmission fluid, but due to the age of your vehicle, it is possible that fixing the problem would be as expensive as replacing the transmission assembly.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
