P0732 Mitsubishi Code - Gear 2 Incorrect Ratio
Quick Answer
This diagnosis monitors actual gear position by checking the torque converter slip ratio calculated by Transmission Control Module (TCM) as follows: Torque converter slip ratio = A x C/B A: Output shaft revolution signal from revolution sensor B: Engine speed signal from Engine Control Module (ECM) C: Gear ratio determined as gear position which TCM supposes If the actual gear position is higher than the position (2nd) supposed by TCM, the slip ratio will be more than normal. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Shift Solenoids. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0732 Mitsubishi indicates Gear 2 Incorrect Ratio.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Shift Solenoids.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0732 Mitsubishi Description
Torque converter slip ratio = A x C/B
A: Output shaft revolution signal from revolution sensor
B: Engine speed signal from Engine Control Module (ECM)
C: Gear ratio determined as gear position which TCM supposes
If the actual gear position is higher than the position (2nd) supposed by TCM, the slip ratio will be more than normal. In case the ratio exceeds the specified value, TCM judges this diagnosis malfunction.
What are the Possible Causes of the DTC P0732 Mitsubishi?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Shift Solenoids
- Shift Solenoids harness is open or shorted
- Shift Solenoids circuit poot electrical connection
- Transmission mechanical problems
- Transmission hydraulic control circuit
How to Fix the DTC P0732 Mitsubishi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0732 Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0732 Mitsubishi code?
Need more information on how to fix the P0732 Mitsubishi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0732 Mitsubishi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0732 Mitsubishi Code
1. What are the common symptoms of OBDII code P0732 in a Mitsubishi indicating Gear 2 Incorrect Ratio?
- Common symptoms include harsh shifting between gears, delayed or erratic shifting, and potential transmission slipping.
2. What are the possible causes of the P0732 code in a Mitsubishi vehicle?
- The code P0732 typically indicates issues with the transmission, such as low transmission fluid levels, a faulty transmission solenoid, or a malfunctioning transmission control module.
3. How can I diagnose the P0732 code in my Mitsubishi to pinpoint the exact issue?
- To diagnose the P0732 code, it is recommended to perform a thorough inspection of the transmission system, check the transmission fluid level and condition, and conduct a comprehensive scan using an OBDII scanner.
4. Can I continue driving my Mitsubishi with the P0732 code present, or should I address it immediately?
- It is not advisable to continue driving with the P0732 code as it can lead to further damage to the transmission. It is recommended to address the issue promptly to avoid costly repairs.
5. What are some DIY repair tips for resolving the P0732 code in a Mitsubishi?
- DIY repair tips may include checking and topping up the transmission fluid, inspecting for any visible leaks, and ensuring all electrical connections to the transmission components are secure.
6. Is it necessary to take my Mitsubishi to a professional mechanic for repairs related to the P0732 code?
- Due to the complexity of transmission systems, it is advisable to seek the expertise of a professional mechanic when dealing with the P0732 code to ensure proper diagnosis and repair.
7. How much can I expect to pay for repairs related to the P0732 code in my Mitsubishi?
- Repair costs for the P0732 code can vary depending on the specific issue causing the code. It is recommended to obtain a diagnostic from a mechanic to get an accurate estimate.
8. Can a simple transmission fluid change resolve the P0732 code in my Mitsubishi?
- In some cases, a transmission fluid change may help resolve the P0732 code if the issue is related to low or contaminated transmission fluid. However, it is important to address any underlying mechanical issues as well.
9. Are there any preventive measures I can take to avoid encountering the P0732 code in my Mitsubishi?
- Regular maintenance of the transmission system, including timely fluid changes and inspections, can help prevent issues that may trigger the P0732 code.
10. How long does it typically take to repair the P0732 code in a Mitsubishi?
- The repair time for the P0732 code can vary depending on the specific cause of the code and the extent of the repairs needed. In some cases, it can be resolved within a few hours, while more complex issues may take longer to fix.
Discuss the causes and fixes for P0732 Mitsubishi OBDII Code
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
