P0729 Hyundai Code - Automatic Transmission 6th Gear Incorrect Ratio
Quick Answer
This malfunction is detected when the A/T does not shift into 6GR position as instructed by TCM. Common causes include Low transmission fluid level, Shift solenoid mechanical fault, Hydraulic circuit fault. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0729 Hyundai indicates Automatic Transmission 6th Gear Incorrect Ratio.
- Common causes
- Common causes include Low transmission fluid level, Shift solenoid mechanical fault, Hydraulic circuit fault.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0729 Hyundai Description
What are the Possible Causes of the DTC P0729 Hyundai?
- Low transmission fluid level
- Shift solenoid mechanical fault
- Hydraulic circuit fault
- Transmission failure
How to Fix the DTC P0729 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0729 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0729 Hyundai code?
Need more information on how to fix the P0729 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0729 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0729 Hyundai Code
1. What are the common symptoms of OBDII code P0729 in a Hyundai related to the automatic transmission 6th gear incorrect ratio?
- Common symptoms include harsh shifting between gears, transmission slipping, decreased fuel efficiency, and the Check Engine Light being illuminated.
2. What could be the possible causes of OBDII code P0729 in a Hyundai indicating an incorrect ratio in the 6th gear of the automatic transmission?
- Possible causes may include a faulty transmission speed sensor, issues with the transmission control module, low transmission fluid level, or a malfunctioning clutch.
3. How can I diagnose the OBDII code P0729 in my Hyundai if I suspect an incorrect ratio in the 6th gear of the automatic transmission?
- Diagnosis typically involves using a professional OBDII scanner to retrieve the trouble codes, checking the transmission fluid level and condition, and inspecting the speed sensor and related wiring for any damage.
4. Can driving with OBDII code P0729 in a Hyundai, indicating an incorrect ratio in the 6th gear, cause further damage to the vehicle?
- Continuing to drive with this code present can potentially cause damage to the transmission components, leading to more extensive and costly repairs down the line if not addressed promptly.
5. What are some possible repair tips for resolving OBDII code P0729 in a Hyundai related to the automatic transmission's 6th gear incorrect ratio?
- Repair tips may include replacing a faulty transmission speed sensor, addressing any wiring issues, ensuring the transmission fluid is at the correct level and in good condition, or reprogramming the transmission control module.
6. Is it possible to reset the OBDII code P0729 in a Hyundai indicating an incorrect ratio in the 6th gear without addressing the underlying issue?
- While clearing the code may temporarily turn off the Check Engine Light, the underlying problem causing the code will persist and may lead to further transmission issues if not properly diagnosed and repaired.
7. How much does it typically cost to fix OBDII code P0729 in a Hyundai related to the automatic transmission's 6th gear incorrect ratio?
- The cost of repair can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.
8. Can a DIY enthusiast with automotive experience fix OBDII code P0729 in a Hyundai indicating an incorrect ratio in the 6th gear?
- Depending on the specific cause of the issue, some DIY enthusiasts with the necessary tools and knowledge may be able to address the problem themselves, such as replacing a faulty speed sensor or checking and topping up transmission fluid.
9. How urgently should I address OBDII code P0729 in my Hyundai indicating an incorrect ratio in the 6th gear of the automatic transmission?
- It is advisable to address this issue promptly to prevent further damage to the transmission and avoid potential safety hazards while driving. Ignoring the problem can lead to more severe issues over time.
10. Are there any recalls or technical service bulletins related to OBDII code P0729 in Hyundai vehicles with automatic transmission 6th gear incorrect ratio issues?
- It is recommended to check with Hyundai dealerships or online resources for any relevant recalls or technical service bulletins related to this specific OBDII code to see if there are any known solutions or updates from the manufacturer.
Discuss the causes and fixes for P0729 Hyundai OBDII Code
Code P0729 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
