P0724 2014 Toyota RAV4 Code - Brake Switch 'B' Circuit High
Quick Answer
The stop light switch is part of a duplex system that transmits two signals: STP and ST1-. Common causes include Faulty Brake Switch (Stop Light Switch), Brake Switch harness is open or shorted, Brake Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0724 2014 Toyota RAV4 indicates Brake Switch 'B' Circuit High.
- Common causes
- Common causes include Faulty Brake Switch (Stop Light Switch), Brake Switch harness is open or shorted, Brake Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0724 2014 Toyota RAV4 Description
What are the Possible Causes of the DTC P0724 2014 Toyota RAV4?
- Faulty Brake Switch (Stop Light Switch)
- Brake Switch harness is open or shorted
- Brake Switch circuit poor electrical connection
- Misadjusted Brake Switch
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0724 2014 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0724 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0724 2014 Toyota RAV4 code?
Need more information on how to fix the P0724 2014 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0724 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0724 2014 Toyota RAV4 Code
1. What are the common symptoms of OBDII code P0724 on a 2014 Toyota RAV4?
- Common symptoms include the check engine light coming on, issues with the vehicle's brake lights, and potential problems with the vehicle's cruise control system.
2. What does the OBDII code P0724 Brake Switch 'B' Circuit High mean on a 2014 Toyota RAV4?
- This code indicates that there is a high voltage condition in the brake switch 'B' circuit, which could be caused by a faulty brake switch or wiring issue.
3. What are possible causes of OBDII code P0724 on a 2014 Toyota RAV4?
- Possible causes include a malfunctioning brake switch, damaged wiring or connectors in the brake switch circuit, or a faulty engine control module (ECM).
4. Can a faulty brake switch cause OBDII code P0724 on a 2014 Toyota RAV4?
- Yes, a faulty brake switch is a common cause of this code as it may send incorrect signals to the ECM, resulting in a high voltage condition in the circuit.
5. How can I diagnose the cause of OBDII code P0724 on my 2014 Toyota RAV4?
- You can start by checking the brake switch for proper operation, inspecting the wiring and connectors for any damage, and using a scan tool to monitor the brake switch signal to the ECM.
6. Is it safe to continue driving with OBDII code P0724 on a 2014 Toyota RAV4?
- It is generally not recommended to drive with this code as it may affect the vehicle's brake lights and potentially the cruise control system, compromising safety and performance.
7. How can I repair OBDII code P0724 on my 2014 Toyota RAV4?
- Repairing this code typically involves replacing the faulty brake switch, repairing any damaged wiring or connectors, and clearing the code with a scan tool.
8. Can I reset OBDII code P0724 on a 2014 Toyota RAV4 by disconnecting the battery?
- While disconnecting the battery may clear the code temporarily, it is recommended to diagnose and repair the underlying issue to prevent the code from reoccurring.
9. Will OBDII code P0724 on a 2014 Toyota RAV4 cause the vehicle to fail an emissions test?
- Yes, this code may cause the vehicle to fail an emissions test as it indicates a fault in the brake switch circuit, which is part of the vehicle's emissions control system.
10. How much does it typically cost to repair OBDII code P0724 on a 2014 Toyota RAV4?
- The cost of repairing this code can vary depending on the cause of the issue, but it may range from $100 to $300 for parts and labor.
Discuss the causes and fixes for P0724 2014 Toyota RAV4 OBDII Code
Code P0724 2014 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
