AutoCodes – Toyota – P0724 2010 Toyota Camry

P0724 2010 Toyota Camry Code - Brake Switch 'B' Circuit High

Quick Answer

This brake switch send a signal to the Engine Control Module (ECM). Common causes include Faulty Brake Switch, Brake Switch harness is open or shorted, Brake Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0724 2010 Toyota Camry indicates Brake Switch 'B' Circuit High.
Common causes: Common causes include Faulty Brake Switch, Brake Switch harness is open or shorted, Brake Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,843

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0724 2010 Toyota Camry Description

This brake switch send a signal to the Engine Control Module (ECM). The signal is used to detect when the brakes have been applied. In some models the brake switch signal voltage is the same as the voltage supplied to the stop lights.

OBDII Code P0724 2010 Toyota Camry - Brake Switch 'B' Circuit High - AutoCodes.com — P0724 2010 Toyota Camry Code - Brake Switch 'B' Circuit High

What does this mean?

What are the Possible Causes of the DTC P0724 2010 Toyota Camry?

Faulty Brake Switch
Brake Switch harness is open or shorted
Brake Switch circuit poor electrical connection
Misadjusted Brake Switch

How to Fix the DTC P0724 2010 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Check to see if the bulbs are good if they are good check the STOP fuse and IGN fuse, if they are good most likely the STOP light switch (near the brake pedal) is bad if there is no wiring issues.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0724 2010 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0724 2010 Toyota Camry code?

Need more information on how to fix the P0724 2010 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0724 2010 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0724 2010 Toyota Camry Code

What does the OBDII code P0724 mean for a 2010 Toyota Camry?

P0724 indicates a high voltage issue in the Brake Switch 'B' Circuit, which is responsible for detecting brake pedal activity and communicating it to the engine and transmission control modules.

What are the common symptoms of code P0724 in a 2010 Toyota Camry?

Symptoms may include the brake lights staying on, the torque converter not locking up, transmission shifting issues, or the Check Engine Light being illuminated.

What causes the P0724 code to appear in a 2010 Toyota Camry?

Common causes include a faulty brake light switch, damaged wiring or connectors in the brake switch circuit, or a malfunctioning PCM/ECM.

Can the P0724 code affect driving performance in a 2010 Toyota Camry?

Yes, it can cause issues like poor transmission performance, inability to engage cruise control, or potential safety concerns due to brake light malfunctions.

How is the P0724 code diagnosed in a 2010 Toyota Camry?

A mechanic would inspect the brake light switch, check for damaged wiring or loose connections, and use a multimeter to test the voltage and continuity of the Brake Switch 'B' Circuit.

Can I drive my 2010 Toyota Camry with a P0724 code?

It is not recommended to drive with this code as it can cause safety issues, such as brake light malfunctions, and may affect transmission performance.

How do I fix the P0724 code on a 2010 Toyota Camry?

The fix may involve replacing the brake light switch, repairing damaged wiring, or cleaning and reconnecting the brake switch connectors.

What tools are needed to repair the P0724 code on a 2010 Toyota Camry?

Basic tools like a multimeter, OBDII scanner, and screwdrivers may be needed to diagnose and repair the issue.

How much does it cost to fix the P0724 code on a 2010 Toyota Camry?

The cost can vary but typically ranges from $50 to $150 for parts and labor if the brake light switch needs to be replaced. Wiring repairs may cost more depending on the extent of the damage.

Can a faulty brake pedal switch trigger other codes alongside P0724?

Yes, a faulty brake pedal switch can trigger related codes, such as those indicating brake light or cruise control system issues.