P0722 KIA Code - Output Speed Sensor No Signal
Quick Answer
The speed sensor detects the revolution of the idler gear parking pawl lock gear and emits a pulse signal. Common causes include Faulty Speed Sensor, Speed Sensor harness is open or shorted, Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0722 KIA indicates Output Speed Sensor No Signal.
- Common causes
- Common causes include Faulty Speed Sensor, Speed Sensor harness is open or shorted, Speed Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0722 KIA Description
What are the Possible Causes of the DTC P0722 KIA?
- Faulty Speed Sensor
- Speed Sensor harness is open or shorted
- Speed Sensor circuit poor electrical connection
How to Fix the DTC P0722 KIA?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0722 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0722 KIA code?
Need more information on how to fix the P0722 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0722 KIA code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0722 KIA Code
1. What are the common symptoms of OBDII code P0722 in a KIA vehicle?
- Common symptoms include issues with shifting gears, erratic speedometer readings, and the transmission going into limp mode.
2. What does the OBDII code P0722 for a KIA mean?
- The code P0722 indicates that the vehicle's Engine Control Module (ECM) has detected no signal from the output speed sensor.
3. What are the possible causes of OBDII code P0722 in a KIA?
- The possible causes include a faulty output speed sensor, damaged wiring or connectors related to the sensor, or a malfunctioning ECM.
4. How can I diagnose the cause of OBDII code P0722 in my KIA?
- It is recommended to start by checking the output speed sensor and its wiring for any visible damage. Using a multimeter to test the sensor's resistance can also help identify issues.
5. Can a faulty output speed sensor be repaired, or does it need to be replaced?
- In most cases, a faulty output speed sensor will need to be replaced to resolve the P0722 code and related issues with the vehicle's transmission.
6. Will driving with OBDII code P0722 in a KIA cause further damage to the vehicle?
- Continuing to drive with the P0722 code can potentially lead to more severe transmission problems, so it is advisable to address the issue promptly.
7. How much does it typically cost to repair OBDII code P0722 in a KIA?
- The cost of repairing OBDII code P0722 in a KIA can vary depending on the extent of the damage and whether the sensor needs to be replaced. Costs may range from $100 to $300 or more.
8. Can I reset the OBDII code P0722 in my KIA without fixing the underlying issue?
- While clearing the code temporarily may make the warning light disappear, the underlying problem causing the P0722 code will persist until properly addressed.
9. Is it safe to drive my KIA with the OBDII code P0722 if the vehicle seems to be operating normally?
- It is not recommended to drive the vehicle with the P0722 code present, as it can lead to transmission issues and potentially unsafe driving conditions.
10. How long does it typically take to repair OBDII code P0722 in a KIA?
- Repairing OBDII code P0722 in a KIA can usually be done within a few hours, depending on the accessibility of the output speed sensor and the extent of any necessary repairs.
Discuss the causes and fixes for P0722 KIA OBDII Code
-
Si.mi vehículo.inicia en Dólares pero hace el cambio,lo paso a manual,hago 2, ordenó la tercera,pero parece se frenará y no me hace 4... Si devuelvo de 3 a 2 manual ,el vehículo,parece q se soltará y coje más velocidad en 2.....
-
Note that when this occurs most cars will go into a "limp" mode. This is to protect the transmission. To the driver it feels like you are taking off from second gear. Each time you turn the car on/off limp mode is reset. In my case, only after turning the car on, it would shift out of 1st with a thud at around 30mph's. From that point on it would not "thud" but the car would lose 70% of it's power. Turning the car on/off repeats this cycle.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
