AutoCodes – Ford – P0722 2010 Ford Fusion

P0722 2010 Ford Fusion Code - Output Shaft Speed Sensor No Signal

Quick Answer

The Output Shaft Speed (OSS) Sensor provides the Powertrain Control Module (PCM) with information about the rotational speed of an output shaft. Common causes include Faulty Output Speed Sensor (OSS), Output Speed Sensor harness is open or shorted, Output Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0722 2010 Ford Fusion indicates Output Shaft Speed Sensor No Signal.
Common causes: Common causes include Faulty Output Speed Sensor (OSS), Output Speed Sensor harness is open or shorted, Output Speed Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 8,602

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 13, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0722 2010 Ford Fusion Description

The Output Shaft Speed (OSS) Sensor provides the Powertrain Control Module (PCM) with information about the rotational speed of an output shaft. The PCM uses the information to control and diagnose powertrain behavior. In some applications, the sensor is also used as the source of vehicle speed. The sensor may be physically located in different places on the vehicle, depending upon the specific application. The design of each speed sensor is unique and depends on which powertrain control feature uses the information that is generated. The Diagnostic Trouble Code (DTC) will set if the PCM detects no signal from the OSS sensor.

OBDII Code P0722 2010 Ford Fusion - Output Shaft Speed Sensor No Signal - AutoCodes.com — P0722 2010 Ford Fusion Code - Output Shaft Speed Sensor No Signal

What does this mean?

What are the Possible Causes of the DTC P0722 2010 Ford Fusion?

Faulty Output Speed Sensor (OSS)
Output Speed Sensor harness is open or shorted
Output Speed Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0722 2010 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0722 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0722 2010 Ford Fusion code?

Need more information on how to fix the P0722 2010 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0722 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0722 2010 Ford Fusion Code

1. What are the common symptoms of OBDII code P0722 in a 2010 Ford Fusion?

The common symptoms include erratic shifting, transmission slipping, speedometer not working, and the Check Engine Light illuminating.

2. What does OBDII code P0722 in a 2010 Ford Fusion mean?

Code P0722 indicates a problem with the Output Shaft Speed Sensor, specifically that there is no signal being received from the sensor.

3. What are the potential causes of OBDII code P0722 in a 2010 Ford Fusion?

Potential causes include a faulty Output Shaft Speed Sensor, damaged sensor wiring, a defective sensor connector, or issues with the transmission control module.

4. How can I diagnose the cause of OBDII code P0722 in my 2010 Ford Fusion?

Diagnosis involves checking the sensor wiring and connector for damage, testing the sensor's resistance, and verifying input/output speed sensor data with a scan tool.

5. Can I continue driving my 2010 Ford Fusion with OBDII code P0722?

It is not recommended to drive with code P0722 as it can lead to transmission problems and further damage. It's best to address the issue promptly.

6. How can I repair OBDII code P0722 in my 2010 Ford Fusion?

Repair typically involves replacing the Output Shaft Speed Sensor, repairing or replacing damaged wiring, and ensuring proper connection of the sensor.

7. Are there any DIY tips for fixing OBDII code P0722 in a 2010 Ford Fusion?

While some may attempt DIY repairs, working with transmission sensors and wiring can be complex. It's often best to have a professional diagnose and repair the issue.

8. How much does it cost to fix OBDII code P0722 in a 2010 Ford Fusion?

The cost can vary depending on the exact cause of the issue, but it typically ranges from $150 to $300 for parts and labor at a repair shop.

9. Can a bad Output Shaft Speed Sensor cause other problems in a 2010 Ford Fusion?

Yes, a faulty sensor can cause issues like harsh shifting, transmission slipping, and even the transmission going into a failsafe mode to protect itself.

10. How long does it take to repair OBDII code P0722 in a 2010 Ford Fusion?

The repair time can vary based on the exact cause and the shop's workload, but it generally takes around 1-2 hours to diagnose and replace the Output Shaft Speed Sensor.