P0721 Audi Code - Output Speed Sensor Range/Performance
Quick Answer
The speed sensor detects the revolution of the idler gear parking pawl lock gear and emits a pulse signal. Common causes include Faulty Speed Sensor, Speed Sensor harness is open or shorted, Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0721 Audi indicates Output Speed Sensor Range/Performance.
- Common causes
- Common causes include Faulty Speed Sensor, Speed Sensor harness is open or shorted, Speed Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0721 Audi Description
What are the Possible Causes of the DTC P0721 Audi?
- Faulty Speed Sensor
- Speed Sensor harness is open or shorted
- Speed Sensor circuit poor electrical connection
How to Fix the DTC P0721 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0721 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0721 Audi code?
Need more information on how to fix the P0721 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0721 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0721 Audi Code
1. What does the OBDII code P0721 mean in an Audi?
P0721 indicates a problem with the output speed sensor, specifically a range or performance issue that affects the transmission's ability to accurately measure output shaft speed.
2. What are common symptoms of code P0721 in an Audi?
Symptoms may include erratic shifting, transmission slipping, poor fuel efficiency, illuminated check engine light, or the vehicle going into limp mode.
3. What causes the P0721 code to appear in an Audi?
Common causes include a faulty output speed sensor, damaged wiring or connectors, low or dirty transmission fluid, or internal transmission issues.
4. How can I diagnose the P0721 code in my Audi?
Use a diagnostic scanner to confirm the code, inspect the output speed sensor and wiring for damage, check transmission fluid levels, and verify sensor readings against manufacturer specifications.
5. Can driving with the P0721 code damage my Audi?
Yes, driving with this code may lead to further transmission damage, reduced performance, or unsafe driving conditions due to erratic shifting.
6. How do I fix the P0721 code in an Audi?
Repairs may include replacing the output speed sensor, repairing damaged wiring or connectors, flushing and refilling the transmission fluid, or addressing internal transmission issues.
7. How much does it cost to repair the P0721 code in an Audi?
Costs vary depending on the repair needed. Replacing the output speed sensor typically costs $100–$300, while more extensive transmission repairs may be significantly higher.
8. Can low transmission fluid cause the P0721 code in an Audi?
Yes, low or dirty transmission fluid can affect sensor accuracy and lead to the P0721 code.
9. Where is the output speed sensor located in an Audi?
The output speed sensor is typically located on the transmission housing near the output shaft.
10. Can a faulty output speed sensor cause transmission problems in an Audi?
Yes, a faulty sensor can lead to inaccurate speed readings, causing shifting issues and reduced transmission performance.
Discuss the causes and fixes for P0721 Audi OBDII Code
-
yo tengo un detalle con ese codigo ya remplace los sensores pero sigue igual el vehiculo es un sead altea y no camina la unidad en frio y se aloca el indicador de cambios de primera se abienta a quinta y ahi se queda , y una vez calentando la unidad trabaja normalmente a la temperatura de 90 grados f con el codigo (p0721)
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
