P0720 Jeep Code - Output Speed Sensor Circuit Malfunction
Quick Answer
The speed sensor detects the revolution of the idler gear parking pawl lock gear and emits a pulse signal. Common causes include Faulty Speed Sensor, Speed Sensor harness is open or shorted, Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0720 Jeep indicates Output Speed Sensor Circuit Malfunction.
- Common causes
- Common causes include Faulty Speed Sensor, Speed Sensor harness is open or shorted, Speed Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0720 Jeep Description
What are the Possible Causes of the DTC P0720 Jeep?
- Faulty Speed Sensor
- Speed Sensor harness is open or shorted
- Speed Sensor circuit poor electrical connection
How to Fix the DTC P0720 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0720 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0720 Jeep code?
Need more information on how to fix the P0720 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0720 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0720 Jeep Code
1. What are the common symptoms of OBDII code P0720 in a Jeep?
- Common symptoms include erratic speedometer readings, harsh shifting, stalling at idle, and the inability to shift gears properly.
2. What causes the OBDII code P0720 in a Jeep?
- The most common cause of this code is a faulty output speed sensor or issues with the sensor circuit, such as damaged wiring or poor connections.
3. How can I diagnose the OBDII code P0720 in my Jeep?
- Diagnosing this code typically involves checking the output speed sensor for proper operation, inspecting the sensor wiring and connections, and using a scan tool to monitor speed sensor data.
4. Can a faulty output speed sensor be repaired, or does it need to be replaced?
- In most cases, a faulty output speed sensor will need to be replaced rather than repaired to resolve the P0720 code and related issues.
5. Are there any DIY repair tips for fixing the Output Speed Sensor Circuit Malfunction in a Jeep?
- DIY repair tips include checking for loose or damaged wiring around the sensor, cleaning the sensor connector, and ensuring the sensor is securely mounted in place.
6. Will driving with the OBDII code P0720 in a Jeep cause further damage to the vehicle?
- Continuing to drive with this code may lead to further transmission issues, reduced fuel efficiency, and potential damage to other drivetrain components.
7. How much does it typically cost to repair the Output Speed Sensor Circuit Malfunction in a Jeep?
- The cost of repairing this issue can vary depending on the extent of the problem, but it typically ranges from $100 to $300 for parts and labor.
8. Can I reset the OBDII code P0720 in my Jeep without fixing the underlying issue?
- While you can clear the code temporarily, it will likely return until the root cause, such as a faulty output speed sensor, is addressed.
9. Is the Output Speed Sensor Circuit Malfunction a common issue in Jeep vehicles?
- Yes, this code is relatively common in Jeep vehicles, especially on models with higher mileage or older sensors.
10. How urgent is it to address the OBDII code P0720 in a Jeep?
- It is important to address this code promptly to prevent further transmission problems and ensure the vehicle operates safely and efficiently.
Discuss the causes and fixes for P0720 Jeep OBDII Code
-
1999 jeep grand cherokee - p0720 Output Shaft Speed Sensor Circut, Can a bad sensor keep the vehicle from engaging the passing gear?
-
FIXED ... Got my passing gear back ... No more check engine light ... Shifts much better. Had bought the new sensor with a new connector just in case but didn't need it. Total cost $14.84 + tax
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
