AutoCodes – GMC – P0719 GMC

P0719 GMC Code - Brake Switch Circuit Low Input

Quick Answer

The brake switch indicates brake pedal status to the Powertrain Control Module (PCM). Common causes include Faulty Brake Switch, Brake Switch harness is open or shorted, Brake Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0719 GMC indicates Brake Switch Circuit Low Input.
Common causes: Common causes include Faulty Brake Switch, Brake Switch harness is open or shorted, Brake Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 12,076

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 08, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0719 GMC Description

The brake switch indicates brake pedal status to the Powertrain Control Module (PCM). The brake switch is a normally-closed switch that supplies battery voltage on circuit 420 to the PCM. Applying the brake pedal opens the switch, interrupting voltage to the PCM. When the brake pedal is released, the PCM receives a constant voltage signal. If the PCM receives a zero voltage signal at the brake switch input, and the torque converter clutch (TCC) is engaged, the PCM de-energizes the TCC solenoid valve. The PCM disregards the brake switch input for TCC scheduling if there is a brake switch circuit fault.

OBDII Code P0719 GMC - Brake Switch Circuit Low Input - AutoCodes.com — P0719 GMC Code - Brake Switch Circuit Low Input

What does this mean?

What are the Possible Causes of the DTC P0719 GMC?

Faulty Brake Switch
Brake Switch harness is open or shorted
Brake Switch circuit poor electrical connection

How to Fix the DTC P0719 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0719 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0719 GMC code?

Need more information on how to fix the P0719 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0719 GMC code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.