AutoCodes – Mitsubishi – P0717 Mitsubishi

P0717 Mitsubishi Code - Input Shaft 1 Speed Sensor System

Quick Answer

The Input Speed Sensor detects the primary pulley revolution speed and sends a signal to the Transmission Control Module (TCM) and Engine Control Module (ECM). Common causes include Faulty Transmission Speed Sensor, Transmission Speed Sensor harness is open or shorted, Transmission Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0717 Mitsubishi indicates Input Shaft 1 Speed Sensor System.
Common causes
Common causes include Faulty Transmission Speed Sensor, Transmission Speed Sensor harness is open or shorted, Transmission Speed Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 5,234
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Feb 12, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0717 Mitsubishi Description

The Input Speed Sensor detects the primary pulley revolution speed and sends a signal to the Transmission Control Module (TCM) and Engine Control Module (ECM). The ECM sets the OBDII code when the Input Speed Sensor is out of factory specifications.
OBDII Code P0717 Mitsubishi - Input Shaft 1 Speed Sensor System - AutoCodes.com
P0717 Mitsubishi Code - Input Shaft 1 Speed Sensor System

What are the Possible Causes of the DTC P0717 Mitsubishi?

  • Faulty Transmission Speed Sensor
  • Transmission Speed Sensor harness is open or shorted
  • Transmission Speed Sensor circuit poor electrical connection

How to Fix the DTC P0717 Mitsubishi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0717 Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0717 Mitsubishi code?

Need more information on how to fix the P0717 Mitsubishi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0717 Mitsubishi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0717 Mitsubishi Code

What does the OBDII code P0717 mean for a Mitsubishi vehicle?

P0717 indicates a problem with the Input Shaft Speed Sensor, which is responsible for monitoring the rotational speed of the transmission's input shaft.

What are the common symptoms of the P0717 code in a Mitsubishi?

Symptoms include delayed or harsh shifting, transmission slipping, reduced fuel efficiency, or the transmission going into "limp mode."

What causes the P0717 code to appear in a Mitsubishi?

Common causes include a faulty Input Shaft Speed Sensor, damaged wiring or connectors, or issues within the transmission control module (TCM).

Can driving with a P0717 code damage the vehicle?

Yes, driving with this code can lead to further transmission issues, as improper shifting may cause excessive wear or overheating.

How can I diagnose the P0717 code in a Mitsubishi?

Use an OBDII scanner to confirm the code, inspect the sensor and its wiring for damage, and test the sensor's output with a multimeter to confirm functionality.

How do I fix the P0717 code in a Mitsubishi?

Repair or replace the Input Shaft Speed Sensor if faulty, check and repair any damaged wiring or connectors, and reset the code with an OBDII scanner.

Is the Input Shaft Speed Sensor expensive to replace for a Mitsubishi?

The cost varies by model, but the sensor itself is generally affordable, with labor costs being higher depending on the vehicle's design and sensor location.

Where is the Input Shaft Speed Sensor located on a Mitsubishi?

The sensor is typically mounted on or near the transmission housing to monitor the rotation of the input shaft.

Can a dirty transmission fluid cause the P0717 code in a Mitsubishi?

While less common, dirty or contaminated transmission fluid can affect sensor performance and contribute to this code.

How do I prevent the P0717 code from occurring in the future?

Regularly maintain your vehicle by checking transmission fluid levels, inspecting wiring, and addressing sensor issues promptly to prevent long-term damage.

Discuss the causes and fixes for P0717 Mitsubishi OBDII Code

Code P0717 Mitsubishi comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play