P0712 2014 Toyota RAV4 Code - Transmission Fluid Temperature Sensor 'A' Low Input
Quick Answer
The Automatic Transmission Fluid (ATF) Temperature Sensor converts the fluid temperature into a resistance value for use by the Engine Control Module (ECM). Common causes include Faulty Automatic Transmission Fluid (ATF) Temperature Sensor, Automatic Transmission Fluid Temperature Sensor harness is open or shorted, Automatic Transmission Fluid Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0712 2014 Toyota RAV4 indicates Transmission Fluid Temperature Sensor 'A' Low Input.
- Common causes
- Common causes include Faulty Automatic Transmission Fluid (ATF) Temperature Sensor, Automatic Transmission Fluid Temperature Sensor harness is open or shorted, Automatic Transmission Fluid Temperature Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0712 2014 Toyota RAV4 Description
This Diagnostic Trouble Code (DTC) indicates an open or short in the ATF temperature sensor circuit. The ATF temperature sensor converts ATF temperature into an electrical resistance value. Based on the resistance, the ECM determines the ATF temperature, and the ECM detects an open or short in the ATF temperature circuit. If the resistance value of the ATF temperature is below 79 Ω*1 or higher than 156 kΩ*2, the ECM interprets this as a fault in the ATF sensor or wiring. The ECM will turn on the MIL and store the DTC.
What are the Possible Causes of the DTC P0712 2014 Toyota RAV4?
- Faulty Automatic Transmission Fluid (ATF) Temperature Sensor
- Automatic Transmission Fluid Temperature Sensor harness is open or shorted
- Automatic Transmission Fluid Temperature Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0712 2014 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0712 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0712 2014 Toyota RAV4 code?
Need more information on how to fix the P0712 2014 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0712 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0712 2014 Toyota RAV4 Code
1. What are the common symptoms of OBDII code P0712 in a 2014 Toyota RAV4?
The common symptoms of code P0712 include the transmission not shifting properly, the transmission slipping, and the vehicle going into a failsafe mode.
2. What does the OBDII code P0712 indicate in a 2014 Toyota RAV4?
Code P0712 indicates that the Transmission Fluid Temperature Sensor 'A' is sending a low input signal to the vehicle's engine control module.
3. What are the possible causes of OBDII code P0712 in a 2014 Toyota RAV4?
Possible causes of code P0712 include a faulty transmission fluid temperature sensor, damaged wiring or connectors related to the sensor, low transmission fluid level, or a malfunctioning engine control module.
4. How can I diagnose OBDII code P0712 in a 2014 Toyota RAV4?
Diagnosing code P0712 involves checking the transmission fluid level, inspecting the sensor and its wiring for damage, and using a scan tool to monitor the sensor's readings while the vehicle is running.
5. How can I repair OBDII code P0712 in a 2014 Toyota RAV4?
To repair code P0712, you may need to replace the Transmission Fluid Temperature Sensor 'A', repair or replace any damaged wiring or connectors, ensure the transmission fluid level is correct, and reset the trouble codes with a scan tool.
6. Can driving with OBDII code P0712 in a 2014 Toyota RAV4 cause further damage?
Continuing to drive with code P0712 may lead to further transmission issues, such as overheating or internal damage, so it is recommended to address the problem promptly.
7. Is it safe to continue driving my 2014 Toyota RAV4 with OBDII code P0712?
It is not recommended to continue driving with code P0712 as it can affect the transmission's performance and potentially lead to more severe issues if left unaddressed.
8. How much does it cost to repair OBDII code P0712 in a 2014 Toyota RAV4?
The cost of repairing code P0712 can vary depending on the specific cause of the issue, but it typically involves the cost of parts and labor for sensor replacement or wiring repairs.
9. Can I reset OBDII code P0712 in a 2014 Toyota RAV4 myself?
You can attempt to reset the trouble codes using an OBDII scan tool, but it is important to diagnose and address the underlying issue causing code P0712 to prevent it from reoccurring.
10. Will OBDII code P0712 cause my 2014 Toyota RAV4 to fail an emissions test?
Code P0712 may cause your vehicle to fail an emissions test as it signifies a problem with the transmission system, which can impact the overall performance and emissions output of the vehicle.
Discuss the causes and fixes for P0712 2014 Toyota RAV4 OBDII Code
Code P0712 2014 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
