P0711 Audi Code - Transmission Fluid Temperature Sensor Range Performance
Quick Answer
The ATF (Automatic Transmission Fluid) Temperature Sensor converts the fluid temperature into a resistance value. Common causes include Faulty Transmission Fluid Temperature Sensor, Transmission Fluid Temperature Sensor harness is open or shorted, Transmission Fluid Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0711 Audi indicates Transmission Fluid Temperature Sensor Range Performance.
- Common causes
- Common causes include Faulty Transmission Fluid Temperature Sensor, Transmission Fluid Temperature Sensor harness is open or shorted, Transmission Fluid Temperature Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0711 Audi Description
What are the Possible Causes of the DTC P0711 Audi?
- Faulty Transmission Fluid Temperature Sensor
- Transmission Fluid Temperature Sensor harness is open or shorted
- Transmission Fluid Temperature Sensor circuit poor electrical connection
How to Fix the DTC P0711 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0711 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0711 Audi code?
Need more information on how to fix the P0711 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0711 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0711 Audi Code
1. What does the OBDII code P0711 mean on an Audi?
P0711 indicates an issue with the Transmission Fluid Temperature (TFT) Sensor, specifically that its range or performance is outside of expected parameters.
2. What are the common symptoms of P0711 in an Audi?
Symptoms include erratic shifting, transmission overheating, poor fuel efficiency, or the vehicle entering limp mode.
3. What causes the P0711 code to appear in an Audi?
Common causes include a faulty TFT sensor, damaged wiring or connectors, low or dirty transmission fluid, or issues with the transmission control module (TCM).
4. Can driving with the P0711 code cause damage to my Audi?
Yes, ignoring P0711 can lead to transmission overheating or long-term damage if the issue is not addressed promptly.
5. How do I fix the P0711 code on my Audi?
Repairs can involve replacing the TFT sensor, repairing or replacing damaged wiring, flushing and refilling the transmission fluid, or updating/reprogramming the TCM.
6. How is the P0711 code diagnosed in an Audi?
A technician will use a scan tool to confirm the code, inspect wiring and connectors, check fluid levels and condition, and test the TFT sensor for proper operation.
7. Can low transmission fluid cause the P0711 code in an Audi?
Yes, low or dirty transmission fluid can cause the sensor to give inaccurate readings, triggering the P0711 code.
8. How much does it cost to fix the P0711 code on an Audi?
Costs can vary depending on the issue, ranging from $100–$300 for a sensor replacement to $200–$500+ for fluid service or wiring repairs.
9. Where is the Transmission Fluid Temperature Sensor located in an Audi?
The TFT sensor is typically located inside the transmission, often integrated into the transmission fluid pressure sensor or valve body.
10. Can a faulty TCM cause the P0711 code in an Audi?
Yes, a malfunctioning Transmission Control Module can misinterpret sensor data or fail to communicate properly, resulting in the P0711 code.
Discuss the causes and fixes for P0711 Audi OBDII Code
Code P0711 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
