P0711 2014 GMC Sierra Code - Transmission Fluid Temperature Sensor Performance
Quick Answer
The Automatic Transmission Fluid Temperature (TFT) sensor is a resistor, or thermistor, which changes value based on temperature. Common causes include Faulty Control Solenoid Valve Assembly, Control Solenoid Valve Assembly harness is open or shorted, Control Solenoid Valve Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0711 2014 GMC Sierra indicates Transmission Fluid Temperature Sensor Performance.
- Common causes
- Common causes include Faulty Control Solenoid Valve Assembly, Control Solenoid Valve Assembly harness is open or shorted, Control Solenoid Valve Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0711 2014 GMC Sierra Description
The Diagnostic Trouble Code (DTC) will be set if the TCM detects a 20–50°C (36–90°F) or greater difference between the transmission fluid temperature and the TCM substrate temperature, which depends on the average of the transmission fluid temperature, the TCM substrate temperature, and the TCM power up the temperature.
What are the Possible Causes of the DTC P0711 2014 GMC Sierra?
- Faulty Control Solenoid Valve Assembly
- Control Solenoid Valve Assembly harness is open or shorted
- Control Solenoid Valve Assembly circuit poor electrical connection
How to Fix the DTC P0711 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0711 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0711 2014 GMC Sierra code?
Need more information on how to fix the P0711 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0711 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0711 2014 GMC Sierra Code
No Frequently Asked Questions about P0711 2014 GMC Sierra Code found.
Discuss the causes and fixes for P0711 2014 GMC Sierra OBDII Code
Code P0711 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.