P0711 2013 Toyota RAV4 Code - Transmission Fluid Temperature Sensor' A' Range Performance
Quick Answer
The Automatic Transmission Fluid (ATF) Temperature Sensor converts the fluid temperature into a resistance value for use by the Engine Control Module (ECM). Common causes include Faulty Automatic Transmission Fluid (ATF) Temperature Sensor, Automatic Transmission Fluid Temperature Sensor harness is open or shorted, Automatic Transmission Fluid Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0711 2013 Toyota RAV4 indicates Transmission Fluid Temperature Sensor' A' Range Performance.
- Common causes
- Common causes include Faulty Automatic Transmission Fluid (ATF) Temperature Sensor, Automatic Transmission Fluid Temperature Sensor harness is open or shorted, Automatic Transmission Fluid Temperature Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0711 2013 Toyota RAV4 Description
This Diagnostic Trouble Code (DTC) indicates a problem with output signals from the ATF temperature sensor and that the sensor itself is defective.
After running the vehicle for a certain period, the ATF temperature should increase. If the ATF temperature is below 20°C (68°F) after running the vehicle for a certain period, the ECM interprets this as a fault, turns on the MIL, and stores the DTC.
What are the Possible Causes of the DTC P0711 2013 Toyota RAV4?
- Faulty Automatic Transmission Fluid (ATF) Temperature Sensor
- Automatic Transmission Fluid Temperature Sensor harness is open or shorted
- Automatic Transmission Fluid Temperature Sensor circuit poor electrical connection
How to Fix the DTC P0711 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0711 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0711 2013 Toyota RAV4 code?
Need more information on how to fix the P0711 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0711 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0711 2013 Toyota RAV4 Code
What does the OBDII code P0711 mean on a 2013 Toyota RAV4?
The P0711 code indicates an issue with the transmission fluid temperature sensor 'A,' specifically that its readings are out of the expected range or performance parameters.
What are the common symptoms of code P0711 in a 2013 Toyota RAV4?
Common symptoms include erratic shifting, slipping gears, transmission overheating, poor fuel economy, or the vehicle going into "limp mode."
What causes the P0711 code in a 2013 Toyota RAV4?
Potential causes include a faulty transmission fluid temperature sensor, damaged wiring or connectors, low or dirty transmission fluid, or issues with the transmission control module (TCM).
How do I fix the P0711 code on my 2013 Toyota RAV4?
Repairs may involve replacing the transmission fluid temperature sensor, fixing damaged wiring or connectors, flushing and replacing the transmission fluid, or reprogramming or replacing the TCM.
Can I drive my 2013 Toyota RAV4 with a P0711 code?
Driving with a P0711 code is not recommended, as it can lead to further transmission damage or unsafe driving conditions due to erratic shifting or limp mode.
How much does it cost to fix the P0711 code on a Toyota RAV4?
Repair costs can range from $150 to $300 for sensor replacement, with higher costs if wiring or TCM repairs are needed. A diagnostic fee may also apply.
How do I diagnose the P0711 code in a 2013 Toyota RAV4?
Diagnosis typically involves using an OBDII scanner to confirm the code, inspecting the transmission fluid, checking the sensor's wiring and connectors, and testing the sensor's functionality.
Can dirty transmission fluid trigger a P0711 code in a Toyota RAV4?
Yes, dirty or degraded transmission fluid can cause inaccurate temperature readings, potentially triggering the P0711 code.
Where is the transmission fluid temperature sensor located on a 2013 Toyota RAV4?
The transmission fluid temperature sensor is typically located inside the transmission pan, integrated with the valve body or attached to the transmission wiring harness.
Do I need to replace the transmission fluid when fixing the P0711 code?
Yes, it's often recommended to replace or flush the transmission fluid when addressing a P0711 code to ensure proper sensor function and transmission performance.
Discuss the causes and fixes for P0711 2013 Toyota RAV4 OBDII Code
Code P0711 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
