P0708 Audi Code - Transmission Range Switch Circuit High Input
Quick Answer
The park/neutral position (PNP) switch includes a transmission range switch. Common causes include Faulty Park/neutral position switch, Misadjusted park/neutral position switch, Park/neutral position switch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0708 Audi indicates Transmission Range Switch Circuit High Input.
- Common causes
- Common causes include Faulty Park/neutral position switch, Misadjusted park/neutral position switch, Park/neutral position switch harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0708 Audi Description
What are the Possible Causes of the DTC P0708 Audi?
- Faulty Park/neutral position switch
- Misadjusted park/neutral position switch
- Park/neutral position switch harness is open or shorted
- Park/neutral position switch circuit poor electrical connection
How to Fix the DTC P0708 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0708 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0708 Audi code?
Need more information on how to fix the P0708 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0708 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0708 Audi Code
1. What are the common symptoms of OBDII code P0708 in an Audi related to the Transmission Range Switch Circuit High Input?
The common symptoms include difficulty shifting gears, the transmission getting stuck in a particular gear, and the Check Engine Light being illuminated.
2. What are the possible causes of OBDII code P0708 in an Audi?
Possible causes include a faulty transmission range switch, damaged wiring or connectors in the transmission range switch circuit, or a malfunctioning PCM (Powertrain Control Module).
3. How can I diagnose the OBDII code P0708 in my Audi?
Diagnosis typically involves using an OBDII scanner to retrieve the fault code, inspecting the transmission range switch and its circuit for any visible damage, and conducting electrical tests to check for proper voltage and continuity.
4. Can I continue driving my Audi with OBDII code P0708 present?
It is not recommended to continue driving with this code as it can lead to further transmission issues and potentially cause safety hazards. It is best to address the problem promptly.
5. Is it possible to repair OBDII code P0708 in an Audi at home?
While some DIY enthusiasts may attempt to address this issue at home, it is recommended to seek professional help, especially when dealing with transmission-related problems, to ensure proper diagnosis and repair.
6. How much does it typically cost to repair OBDII code P0708 in an Audi?
The cost of repair can vary depending on the underlying cause of the code, the extent of the damage, and labor rates. It is advisable to obtain quotes from reputable mechanics or dealerships.
7. Can resetting the OBDII system clear the P0708 code in an Audi?
Resetting the system may temporarily clear the code, but if the underlying issue causing the code is not addressed, it is likely to reappear. It is crucial to diagnose and fix the root cause of the problem.
8. Is the Transmission Range Switch Circuit High Input a common issue in Audis?
While it may not be as common as some other OBDII codes, issues related to the transmission range switch circuit can occur in Audis, especially in older vehicles or those with high mileage.
9. Can extreme weather conditions affect the occurrence of OBDII code P0708 in an Audi?
Extreme weather conditions, especially temperature fluctuations, can sometimes affect the electrical components of the transmission range switch circuit, potentially leading to the triggering of the P0708 code.
10. How long does it typically take to repair OBDII code P0708 in an Audi?
The repair time can vary based on the specific cause of the code and the complexity of accessing and replacing components. It is best to consult with a professional technician for an accurate estimate of the repair duration.
Discuss the causes and fixes for P0708 Audi OBDII Code
Code P0708 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
