P0707 Audi Code - Transmission Range Switch Circuit Low Input
Quick Answer
The park/neutral position (PNP) switch includes a transmission range switch. Common causes include Faulty Park/neutral position switch, Misadjusted park/neutral position switch, Park/neutral position switch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0707 Audi indicates Transmission Range Switch Circuit Low Input.
- Common causes
- Common causes include Faulty Park/neutral position switch, Misadjusted park/neutral position switch, Park/neutral position switch harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0707 Audi Description
What are the Possible Causes of the DTC P0707 Audi?
- Faulty Park/neutral position switch
- Misadjusted park/neutral position switch
- Park/neutral position switch harness is open or shorted
- Park/neutral position switch circuit poor electrical connection
How to Fix the DTC P0707 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0707 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0707 Audi code?
Need more information on how to fix the P0707 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0707 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0707 Audi Code
1. What does the OBDII code P0707 mean on an Audi?
P0707 indicates a problem with the Transmission Range Switch Circuit, specifically a low input signal being detected by the vehicle’s computer.
2. What are the common symptoms of code P0707 in an Audi?
Symptoms may include difficulty shifting gears, the transmission being stuck in one gear, erratic gear changes, or the vehicle going into limp mode.
3. What causes the P0707 code to appear on an Audi?
Common causes include a faulty transmission range sensor, damaged wiring or connectors in the sensor circuit, or issues with the vehicle’s transmission control module.
4. Can I drive my Audi with the P0707 code?
Driving with P0707 is not recommended as it may result in further transmission damage and unsafe driving conditions like sudden gear changes or limp mode.
5. How do I diagnose the P0707 code on my Audi?
Start by inspecting the transmission range sensor, wiring, and connectors for damage, corrosion, or disconnection. Use a multimeter to check for proper voltage and continuity in the circuit.
6. How do I fix the P0707 code on an Audi?
Repairs may include replacing the transmission range sensor, repairing or replacing damaged wiring or connectors, and reprogramming or replacing the transmission control module if necessary.
7. Is the P0707 code specific to Audis?
No, P0707 is a generic code applicable to many vehicles with OBDII systems, but the exact repair steps may vary depending on the make and model.
8. How much does it cost to fix the P0707 code on an Audi?
Repair costs can range from $150 to $400, depending on whether you need to replace the transmission range sensor or repair wiring. Labor costs may vary.
9. How can I prevent the P0707 code from occurring again?
Regular maintenance, including inspecting wiring and connectors for damage and ensuring the transmission range sensor is functioning properly, can help prevent recurrence.
10. Will clearing the code fix the P0707 issue on my Audi?
Clearing the code may temporarily remove the warning, but the underlying issue needs to be addressed to prevent the code from returning.
Discuss the causes and fixes for P0707 Audi OBDII Code
Code P0707 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
