AutoCodes – RAM – P0706 RAM

P0706 RAM Code - Transmission Range Sensor Rationality

Quick Answer

The signal circuits communicate the shift lever position to the Powertrain Control Module (PCM). Common causes include Shift lever cable out of adjustment, Faulty Transmission Range Sensor, Transmission Range Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0706 RAM indicates Transmission Range Sensor Rationality.
Common causes: Common causes include Shift lever cable out of adjustment, Faulty Transmission Range Sensor, Transmission Range Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,631

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 01, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0706 RAM Description

The signal circuits communicate the shift lever position to the Powertrain Control Module (PCM). Each circuit is terminated at the transmission with a switch. Each switch can be either open or closed, depending on the shift lever position. The PCM can decode this information and determine the shift lever position. Each shift lever position has a certain combination of switch positions (open or closed), this is called a PRNDL code. There are 4 switches, therefore: there are many possible combinations of open and closed switches (codes). However, there are only 9 valid codes (8 for AutoStick), one for each gear position, and three recognized between gear (transition) codes. Any other switch combinations should never occur, these are called invalid codes. The Diagnostic Trouble Code (DTC) will set if an invalid PRNDL code exists for more than 100 milliseconds within one second of power-up or if the PRNDL code error does not correct itself when (or before) the shift lever is moved to a different position (P, R, N, or OD), or if the PCM sees the PRNDL code rapidly (within 7 ms) jump across more than 3 shift lever detent positions.

OBDII Code P0706 RAM - Transmission Range Sensor Rationality - AutoCodes.com — P0706 RAM Code - Transmission Range Sensor Rationality

What does this mean?

What are the Possible Causes of the DTC P0706 RAM?

Shift lever cable out of adjustment
Faulty Transmission Range Sensor
Transmission Range Sensor harness is open or shorted
Transmission Range Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0706 RAM?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0706 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0706 RAM code?

Need more information on how to fix the P0706 RAM code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0706 RAM code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0706 RAM Code

1. What are the common symptoms of OBDII code P0706 RAM (Transmission Range Sensor Rationality)?

- Common symptoms include difficulty shifting gears, erratic shifting behavior, and the transmission not shifting properly.

2. What does the OBDII code P0706 RAM indicate?

- This code indicates that the transmission range sensor is not providing rational data to the vehicle's engine control module.

3. What are the possible causes of OBDII code P0706 RAM?

- Possible causes include a faulty transmission range sensor, damaged wiring or connectors related to the sensor, or issues with the transmission control module.

4. How can I diagnose the cause of OBDII code P0706 RAM?

- Diagnosing the code typically involves checking the transmission range sensor for proper operation, inspecting the sensor's wiring and connectors, and testing the transmission control module.

5. Is it safe to continue driving with OBDII code P0706 RAM present?

- It is not recommended to continue driving with this code present, as it can lead to further transmission issues and potentially unsafe driving conditions.

6. How can I repair OBDII code P0706 RAM?

- Repairing the code usually involves replacing the faulty transmission range sensor, repairing any damaged wiring or connectors, and clearing the code from the vehicle's computer.

7. Can I reset OBDII code P0706 RAM without fixing the underlying issue?

- While you can clear the code temporarily, it is important to address the underlying issue to prevent further transmission problems.

8. What are some tips to prevent OBDII code P0706 RAM from occurring?

- Regularly inspecting the transmission range sensor, maintaining proper transmission fluid levels, and addressing any transmission-related issues promptly can help prevent this code from occurring.

9. Can a DIY enthusiast fix OBDII code P0706 RAM?

- Depending on the individual's skill level and access to tools, a DIY enthusiast may be able to fix this code by following repair instructions and using appropriate diagnostic tools.

10. How long does it typically take to repair OBDII code P0706 RAM?

- The repair time can vary depending on the specific cause of the code, but it may take anywhere from a few hours to a full day to diagnose and fix the issue.