P0706 KIA Code - Transmission Range Sensor Circuit Performance
Quick Answer
The park/neutral position (PNP) switch includes a transmission range switch. Common causes include Faulty Park/neutral position switch, Misadjusted park/neutral position switch, Park/neutral position switch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0706 KIA indicates Transmission Range Sensor Circuit Performance.
- Common causes
- Common causes include Faulty Park/neutral position switch, Misadjusted park/neutral position switch, Park/neutral position switch harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0706 KIA Description
What are the Possible Causes of the DTC P0706 KIA?
- Faulty Park/neutral position switch
- Misadjusted park/neutral position switch
- Park/neutral position switch harness is open or shorted
- Park/neutral position switch circuit poor electrical connection
How to Fix the DTC P0706 KIA?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0706 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0706 KIA code?
Need more information on how to fix the P0706 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0706 KIA code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0706 KIA Code
1. What does the OBDII code P0706 mean on a Kia?
P0706 indicates a problem with the Transmission Range Sensor (TRS) circuit, often related to performance, range, or incorrect signals detected by the Powertrain Control Module (PCM).
2. What are the common symptoms of P0706 on a Kia?
Symptoms include erratic shifting, failure to shift gears, the transmission stuck in one gear, the Check Engine Light illuminated, and reduced engine performance.
3. What causes the P0706 code to appear on a Kia?
Common causes include a faulty Transmission Range Sensor, damaged or corroded wiring or connectors, misaligned TRS, or internal transmission issues.
4. Can I drive my Kia with the P0706 code?
Driving with this code is not recommended, as it may cause unsafe shifting, poor performance, and potential damage to the transmission.
5. How do I diagnose the P0706 code on my Kia?
Diagnosis involves scanning for trouble codes, inspecting the TRS and its wiring for damage, checking for proper alignment, and testing the TRS with a multimeter.
6. How do I fix the P0706 code on a Kia?
Repairs may include replacing the Transmission Range Sensor, repairing or replacing damaged wiring or connectors, realigning the TRS, or addressing internal transmission issues.
7. How much does it cost to fix the P0706 code on a Kia?
The cost depends on the repair. Replacing the TRS typically ranges from $150 to $300, including parts and labor, while wiring repairs may vary.
8. Can a P0706 code be caused by a low transmission fluid level?
While not a direct cause, low or dirty transmission fluid can contribute to improper sensor operation or transmission performance issues.
9. Does the P0706 code on a Kia always mean the TRS is bad?
No, the issue could also stem from wiring problems, connector corrosion, or misalignment rather than a defective sensor.
10. Can I reset the P0706 code without fixing the issue?
Clearing the code without addressing the underlying problem may cause it to return and potentially lead to further transmission damage.
Discuss the causes and fixes for P0706 KIA OBDII Code
-
Don't have the manual for your Kia Cerato, but the problem should be the same. You have to replace the Park/neutral position switch.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
