AutoCodes – Chrysler – P0706 Chrysler

P0706 Chrysler Code - Transmission Range Sensor Rationality

Quick Answer

The signal circuits communicate the shift lever position to the Powertrain Control Module (PCM). Common causes include Shift lever cable out of adjustment, Faulty Transmission Range Sensor, Transmission Range Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0706 Chrysler indicates Transmission Range Sensor Rationality.
Common causes: Common causes include Shift lever cable out of adjustment, Faulty Transmission Range Sensor, Transmission Range Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 27,942

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 01, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0706 Chrysler Description

The signal circuits communicate the shift lever position to the Powertrain Control Module (PCM). Each circuit is terminated at the transmission with a switch. Each switch can be either open or closed, depending on the shift lever position. The PCM can decode this information and determine the shift lever position. Each shift lever position has a certain combination of switch positions (open or closed), this is called a PRNDL code. There are 4 switches, therefore: there are many possible combinations of open and closed switches (codes). However, there are only 9 valid codes (8 for AutoStick), one for each gear position, and three recognized between gear (transition) codes. Any other switch combinations should never occur, these are called invalid codes. The Diagnostic Trouble Code (DTC) will set if an invalid PRNDL code exists for more than 100 milliseconds within one second of power-up or if the PRNDL code error does not correct itself when (or before) the shift lever is moved to a different position (P, R, N, or OD), or if the PCM sees the PRNDL code rapidly (within 7 ms) jump across more than 3 shift lever detent positions.

OBDII Code P0706 Chrysler - Transmission Range Sensor Rationality - AutoCodes.com — P0706 Chrysler Code - Transmission Range Sensor Rationality

What does this mean?

What are the Possible Causes of the DTC P0706 Chrysler?

Shift lever cable out of adjustment
Faulty Transmission Range Sensor
Transmission Range Sensor harness is open or shorted
Transmission Range Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0706 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0706 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0706 Chrysler code?

Need more information on how to fix the P0706 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0706 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0706 Chrysler Code

1. What does the OBDII code P0706 mean on a Chrysler vehicle?

P0706 indicates a problem with the Transmission Range Sensor (TRS), specifically a rationality error where the sensor's output does not match expected values.

2. What are the common symptoms of the P0706 code in a Chrysler?

Symptoms may include difficulty shifting gears, the vehicle staying in limp mode, the transmission not engaging properly, or the Check Engine Light turning on.

3. What causes the P0706 code to appear in a Chrysler?

Common causes include a faulty Transmission Range Sensor, damaged wiring or connectors, a malfunctioning transmission control module (TCM), or mechanical issues within the transmission.

4. Can driving with the P0706 code damage my Chrysler?

Driving with this code may lead to further transmission damage or unsafe driving conditions due to improper gear engagement. It’s best to address the issue promptly.

5. How is the P0706 code diagnosed in a Chrysler?

A technician will use a scan tool to retrieve the code, inspect the TRS and its wiring, check for mechanical issues, and may perform voltage and continuity tests on the circuit.

6. Can I fix the P0706 code on my Chrysler myself?

If you're experienced with car repairs, you can check for loose or damaged wiring around the TRS or replace the sensor. However, professional diagnosis is recommended for accurate repairs.

7. How much does it cost to fix the P0706 code on a Chrysler?

Repair costs vary but may range from $200 to $500, depending on whether the issue is with the sensor, wiring, or other transmission components.

8. Where is the Transmission Range Sensor located on a Chrysler?

The Transmission Range Sensor is typically located on the side of the transmission, near the shift linkage or gear selector.

9. Will resetting the code fix the P0706 issue in a Chrysler?

Resetting the code may temporarily clear the Check Engine Light, but the underlying issue needs to be addressed to prevent the code from returning.

10. What tools are needed to troubleshoot the P0706 code on a Chrysler?

Basic tools include a scan tool or code reader, a multimeter for electrical testing, and potentially a service manual for your specific Chrysler model.