P0705 Ford Code - Transmission Range Sensor Out of Position
Quick Answer
The park/neutral position (PNP) switch includes a transmission range switch. Common causes include Faulty Park/Neutral Position Switch, Misadjusted Park/Neutral Position Switch, Park/Neutral Position Switch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0705 Ford indicates Transmission Range Sensor Out of Position.
- Common causes
- Common causes include Faulty Park/Neutral Position Switch, Misadjusted Park/Neutral Position Switch, Park/Neutral Position Switch harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0705 Ford Description
What are the Possible Causes of the DTC P0705 Ford?
- Faulty Park/Neutral Position Switch
- Misadjusted Park/Neutral Position Switch
- Park/Neutral Position Switch harness is open or shorted
- Park/Neutral Position Switch circuit poor electrical connection
How to Fix the DTC P0705 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0705 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0705 Ford code?
Need more information on how to fix the P0705 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0705 Ford code diagnosed by a professional: Find a repair shop in your area
Information for Specific Ford Models
- P0705 2006 Ford Fusion — Transmission Range Sensor Out of Position
- P0705 2007 Ford Fusion — Transmission Range Sensor Out of Position
- P0705 2008 Ford Fusion — Transmission Range Sensor Out of Position
- P0705 2009 Ford Fusion — Transmission Range Sensor Out of Position
- P0705 2010 Ford Fusion — Transmission Range Sensor Out of Position
- P0705 2011 Ford Fusion — Transmission Range Sensor Out of Position
- P0705 2012 Ford Fusion — Transmission Range Sensor Out of Position
Frequently Asked Questions about P0705 Ford Code
1. What does the OBDII code P0705 mean on a Ford vehicle?
P0705 indicates an issue with the Transmission Range Sensor (TRS), which is out of position or providing an incorrect signal to the Powertrain Control Module (PCM).
2. What are the common symptoms of P0705 on a Ford vehicle?
Symptoms may include the transmission not shifting properly, the vehicle being stuck in a specific gear, the reverse lights not working, or the Check Engine Light being illuminated.
3. What causes the P0705 code to appear on a Ford?
Common causes include a faulty Transmission Range Sensor, damaged or corroded wiring, misaligned gear shifter linkage, or a defective PCM in rare cases.
4. How do I diagnose the P0705 code on my Ford?
Start by inspecting the TRS and its wiring for damage or corrosion. Use a scan tool to check live data from the TRS and verify that the sensor signal matches the gear position.
5. Can I drive my Ford with the P0705 code?
Driving with this code is not recommended, as transmission shifting issues can cause further damage or create unsafe driving conditions.
6. How do I fix the P0705 code on a Ford?
Repairs may involve replacing the Transmission Range Sensor, cleaning or repairing damaged wiring, adjusting the shift linkage, or updating the PCM software if necessary.
7. How much does it cost to fix the P0705 code on a Ford?
The cost to repair this code can range from $150 to $400 depending on whether the TRS needs replacement or if additional repairs are required.
8. Can a bad Transmission Range Sensor cause my Ford to not start?
Yes, if the TRS fails to communicate the correct gear position, the vehicle may think it's not in Park or Neutral, preventing the engine from starting.
9. What tools are needed to repair the P0705 code on a Ford?
Common tools include a scan tool, multimeter, socket set, and possibly a gear alignment tool if the shift linkage requires adjustment.
10. Can a P0705 code clear itself on a Ford?
In rare cases, the code might temporarily clear if the issue is intermittent, but the root cause will need to be addressed to prevent it from returning.
Discuss the causes and fixes for P0705 Ford OBDII Code
-
I went to advance parts and got code p0705 transmission sensor a circuit I just had my evap solenoid canister p0442 changed now the p0705 code appeared I'm stuck don't know what to do need help before I go to the dealer
-
P0442 is a code related to the emissions (smog) of your Ford. The P0705 is related to the transmission, and has nothing to do with the P0442 code.
-
I had p0705 code with o/d off light flashing replacex the sensor and connector to the sensor it still comes back with same code
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
