P0705 2013 Toyota RAV4 Code - Transmission Range Sensor Circuit Malfunction
Quick Answer
These Diagnostic Trouble Codes (DTC) indicate a problem with the Park/Neutral Position (PNP) Switch assembly and the wire harness in the Park/Neutral Position Switch assembly circuit. Common causes include Faulty Park/Neutral Position Switch, Misadjusted Park/Neutral Position Switch, Park/Neutral Position Switch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0705 2013 Toyota RAV4 indicates Transmission Range Sensor Circuit Malfunction.
- Common causes
- Common causes include Faulty Park/Neutral Position Switch, Misadjusted Park/Neutral Position Switch, Park/Neutral Position Switch harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0705 2013 Toyota RAV4 Description
The Park/Neutral Position Switch assembly detects the shift lever position and sends signals to the Engine Control Module (ECM).
For safety, the Park/Neutral Position Switch assembly detects the shift lever position so that the engine can be started only when the shift lever is in P or N.
The Park/Neutral Position Switch assembly sends a signal to the ECM according to the shift lever position (P, N, NSW, R, D or S). The ECM determines that there is a problem with the switch or related parts if it receives more than 1 position signal simultaneously. The ECM will turn on the MIL and store the DTC.
What are the Possible Causes of the DTC P0705 2013 Toyota RAV4?
- Faulty Park/Neutral Position Switch
- Misadjusted Park/Neutral Position Switch
- Park/Neutral Position Switch harness is open or shorted
- Park/Neutral Position Switch circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0705 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0705 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0705 2013 Toyota RAV4 code?
Need more information on how to fix the P0705 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0705 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0705 2013 Toyota RAV4 Code
1. What does the OBDII code P0705 mean on a 2013 Toyota RAV4?
- The code P0705 indicates a Transmission Range Sensor Circuit Malfunction in the vehicle.
2. What are common symptoms of a P0705 code in a Toyota RAV4?
- Common symptoms include difficulty shifting gears, the transmission getting stuck in a single gear, and the engine stalling.
3. What are the potential causes of a P0705 code in a 2013 Toyota RAV4?
- The code can be triggered by a faulty transmission range sensor, damaged wiring or connectors, or issues with the transmission control module.
4. How serious is a P0705 code in a Toyota RAV4?
- Ignoring a P0705 code can lead to further transmission problems and potential safety issues. It is advisable to address this issue promptly.
5. Can I drive my Toyota RAV4 with a P0705 code?
- It is not recommended to drive the vehicle with a P0705 code as it may result in transmission issues that could compromise safety and cause further damage.
6. How can I diagnose a P0705 code on my 2013 Toyota RAV4?
- A professional diagnostic scan tool can be used to read the code and further testing may be required to pinpoint the exact cause of the issue.
7. What is the typical cost to repair a P0705 code in a Toyota RAV4?
- The cost of repairs for a P0705 code can vary depending on the exact cause of the issue, but it may involve sensor replacement, wiring repairs, or module reprogramming.
8. Can I fix a P0705 code in my Toyota RAV4 myself?
- While some DIY enthusiasts may be able to address simple wiring issues, diagnosing and repairing a P0705 code often requires professional expertise and specialized tools.
9. Will resetting the OBDII code make the problem go away?
- Resetting the code may temporarily clear the error message, but it will not fix the underlying issue causing the P0705 code to trigger.
10. How can I prevent a P0705 code from occurring in the future?
- Regular maintenance and inspections of the transmission system, including checking for loose connections and damaged wiring, can help prevent the recurrence of a P0705 code.
Discuss the causes and fixes for P0705 2013 Toyota RAV4 OBDII Code
Code P0705 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
