P0705 2011 Toyota Camry Code - Transmission Range Sensor Malfunction
Quick Answer
The park/neutral position (PNP) switch includes a transmission range switch. Common causes include Faulty Park/Neutral Position Switch, Misadjusted Park/Neutral Position Switch, Park/Neutral Position Switch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0705 2011 Toyota Camry indicates Transmission Range Sensor Malfunction.
- Common causes
- Common causes include Faulty Park/Neutral Position Switch, Misadjusted Park/Neutral Position Switch, Park/Neutral Position Switch harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0705 2011 Toyota Camry Description
What are the Possible Causes of the DTC P0705 2011 Toyota Camry?
- Faulty Park/Neutral Position Switch
- Misadjusted Park/Neutral Position Switch
- Park/Neutral Position Switch harness is open or shorted
- Park/Neutral Position Switch circuit poor electrical connection
How to Fix the DTC P0705 2011 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0705 2011 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0705 2011 Toyota Camry code?
Need more information on how to fix the P0705 2011 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0705 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0705 2011 Toyota Camry Code
1. What does the OBDII code P0705 mean on a 2011 Toyota Camry?
P0705 indicates a Transmission Range Sensor Circuit Malfunction, meaning the sensor is not correctly sending data about the transmission's gear position to the engine control module (ECM).
2. What are the common symptoms of a P0705 code?
Symptoms may include the car being stuck in one gear, difficulty shifting, the reverse lights not working, the transmission going into limp mode, and the check engine light turning on.
3. What causes a P0705 code in a 2011 Toyota Camry?
Common causes include a faulty transmission range sensor, damaged wiring or connectors, misaligned sensor installation, or a malfunction in the ECM.
4. Can I drive my 2011 Toyota Camry with the P0705 code?
Driving with a P0705 code is not recommended as it may cause further damage to the transmission and result in unsafe driving conditions.
5. How do I fix the P0705 code on my Toyota Camry?
Repairs may involve replacing the transmission range sensor, repairing damaged wiring or connectors, or adjusting the sensor alignment. A professional diagnosis is recommended.
6. How much does it cost to repair the P0705 code on a 2011 Toyota Camry?
The repair cost can range from $150 to $400, depending on whether the sensor, wiring, or other components need replacement and labor costs.
7. Where is the transmission range sensor located on a 2011 Toyota Camry?
The transmission range sensor is typically located on the outside of the transmission housing, near the shift linkage.
8. Can a bad transmission range sensor damage the transmission?
Yes, if the sensor is faulty, it can cause improper gear engagement, resulting in increased wear and potential damage to the transmission over time.
9. Do I need to reprogram the ECM after replacing the transmission range sensor?
In most cases, reprogramming is not needed, but it's recommended to clear the code and test the system with a scan tool after repairs.
10. How can I prevent the P0705 code from recurring?
Regular maintenance, such as inspecting wiring and connectors and ensuring the transmission range sensor is properly aligned, can help prevent this code from returning.
Discuss the causes and fixes for P0705 2011 Toyota Camry OBDII Code
Code P0705 2011 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
