AutoCodes – Infiniti – P0703 Infiniti

P0703 Infiniti Code - Stop Lamp Swich Circuit

Quick Answer

The Brake Pedal Position (BPP) switch is sometimes referred to as the stop lamp switch. Common causes include Faulty Brake Pedal Position (BPP) Switch (Stop Lamp Switch), Misadjusted Brake Pedal Position Switch, Brake Pedal Position Switch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0703 Infiniti indicates Stop Lamp Swich Circuit.
Common causes: Common causes include Faulty Brake Pedal Position (BPP) Switch (Stop Lamp Switch), Misadjusted Brake Pedal Position Switch, Brake Pedal Position Switch harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,166

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 13, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0703 Infiniti Description

The Brake Pedal Position (BPP) switch is sometimes referred to as the stop lamp switch. The BPP switch provides a signal to the Engine Control Module (ECM) indicating the brakes are applied. The BPP switch is normally open and mounted on the brake pedal support. The Engine Control Module monitors the BPP switch. The Diagnostic Trouble Code (DTC) will set when the Engine Control Module did not receive a BPP switch input.

OBDII Code P0703 Infiniti - Stop Lamp Swich Circuit - AutoCodes.com — P0703 Infiniti Code - Stop Lamp Swich Circuit

What does this mean?

What are the Possible Causes of the DTC P0703 Infiniti?

Faulty Brake Pedal Position (BPP) Switch (Stop Lamp Switch)
Misadjusted Brake Pedal Position Switch
Brake Pedal Position Switch harness is open or shorted
Brake Pedal Position Switch circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0703 Infiniti?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Check if the stop light works with when the brake pedal is depressed if the brake lights are inoperative, replace or adjust the Brake Pedal Position (BPP) Switch (Stop Lamp Switch).

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0703 Infiniti code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0703 Infiniti code?

Need more information on how to fix the P0703 Infiniti code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0703 Infiniti code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.