AutoCodesDodge – P0699 Dodge

P0699 Dodge Code - Accelerator Pedal Position Sensor Supply Voltage Too High

Quick Answer

The Engine Control Module (ECM) has detected a high voltage at the Accelerator Pedal Position Sensor (APPS) supply circuit Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0699 Dodge indicates Accelerator Pedal Position Sensor Supply Voltage Too High.
Common causes
Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,528
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 06, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0699 Dodge Description

The Engine Control Module (ECM) has detected a high voltage at the Accelerator Pedal Position Sensor (APPS) supply circuit
OBDII Code P0699 Dodge - Accelerator Pedal Position Sensor Supply Voltage Too High - AutoCodes.com
P0699 Dodge Code - Accelerator Pedal Position Sensor Supply Voltage Too High

What are the Possible Causes of the DTC P0699 Dodge?

  • Faulty Accelerator Pedal Position Sensor
  • Accelerator Pedal Position Sensor harness is open or shorted
  • Accelerator Pedal Position Sensor circuit poor electrical connection

How to Fix the DTC P0699 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0699 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0699 Dodge code?

Need more information on how to fix the P0699 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0699 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0699 Dodge Code

1. What does the OBDII code P0699 mean on a Dodge vehicle?

P0699 indicates that the Accelerator Pedal Position (APP) Sensor's supply voltage is too high, which can disrupt proper throttle control.

2. What are the common symptoms of a P0699 code?

Symptoms may include poor acceleration, erratic throttle response, reduced engine performance, or the vehicle entering "limp mode."

3. What causes the P0699 code to appear?

Common causes include a faulty APP sensor, damaged wiring or connectors, a short circuit, or issues with the powertrain control module (PCM).

4. Can a P0699 code lead to unsafe driving conditions?

Yes, it can cause unpredictable throttle behavior or limited power, which may create unsafe driving situations.

5. How do you diagnose a P0699 code in a Dodge?

Start by checking the APP sensor and its wiring for damage or loose connections. Use a multimeter to measure voltage and verify the sensor's output is within the specified range.

6. Can a damaged APP sensor trigger the P0699 code?

Yes, a malfunctioning APP sensor is one of the most common reasons for this code.

7. How is the P0699 code fixed?

Repairs may involve replacing the APP sensor, repairing or replacing damaged wiring, or, in rare cases, reprogramming or replacing the PCM.

8. Is it safe to drive with a P0699 code?

It’s not recommended, as the vehicle may experience unpredictable throttle performance or limited power, potentially leading to unsafe driving conditions.

9. How much does it cost to fix a P0699 code?

Repair costs vary but typically range from $100 to $300 for parts and labor, depending on whether the APP sensor or wiring needs replacement.

10. Can a P0699 code clear itself after repairs?

The code may clear if the issue is resolved, but it’s best to use an OBDII scanner to erase the code and confirm the repair.

Discuss the causes and fixes for P0699 Dodge OBDII Code

Code P0699 Dodge comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play