AutoCodes – Generic – P0699

P0699 Code - Sensor Reference Voltage 'C' Circuit High

Quick Answer

The control module has internal 5-volt reference buses called "5-volt reference". Common causes include Faulty Engine Control Module (ECM), ECM harness is open or shorted, ECM circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0699 indicates Sensor Reference Voltage 'C' Circuit High.
Common causes: Common causes include Faulty Engine Control Module (ECM), ECM harness is open or shorted, ECM circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 7,991

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 06, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0699 Description

The control module has internal 5-volt reference buses called "5-volt reference". Each reference bus provided 5-volt reference circuit for more than one sensor. Therefore, a fault condition on one 5-volt reference circuit will affect the other 5-volt reference circuits connected to the reference bus. The control module monitors the voltage on the 5-volt reference buses.

OBDII Code P0699 - Sensor Reference Voltage 'C' Circuit High - AutoCodes.com — P0699 Code - Sensor Reference Voltage 'C' Circuit High

What does this mean?

What are the Possible Causes of the DTC P0699?

Faulty Engine Control Module (ECM)
ECM harness is open or shorted
ECM circuit poor electrical connection
Shorted sensor on 5 volt circuit

How to Fix the DTC P0699?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0699 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0699 code?

Need more information on how to fix the P0699 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0699 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P0699 Buick — 5V Reference 3 Circuit High Voltage
P0699 Cadillac — 5V Reference 3 Circuit High Voltage
P0699 Chevrolet — 5V Reference 3 Circuit High Voltage
P0699 Chrysler — Accelerator Pedal Position Sensor Supply Voltage Too High
P0699 Dodge — Accelerator Pedal Position Sensor Supply Voltage Too High
P0699 GMC — 5V Reference 3 Circuit High Voltage
P0699 Hyundai — Sensor Reference Voltage 'C' Circuit High
P0699 Jeep — Accelerator Pedal Position Sensor Supply Voltage Too High
P0699 KIA — Sensor Reference Voltage 'C' Circuit High
P0699 Suzuki — 5 Volt Reference 3 Circuit High Voltage
P0699 Volkswagen — Sensor Reference Voltage 'C' Circuit High

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.