AutoCodes – MINI – P0692 MINI

P0692 MINI Code - Electric Fan Activation

Quick Answer

The Engine Cooling Fan is normally controlled by the Engine Control Module (ECM). Common causes include Faulty Fan 1 Relay, Fan 1 Relay harness is open or shorted, Fan 1 Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0692 MINI indicates Electric Fan Activation.
Common causes: Common causes include Faulty Fan 1 Relay, Fan 1 Relay harness is open or shorted, Fan 1 Relay circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,360

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 20, 2021

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0692 MINI Description

The Engine Cooling Fan is normally controlled by the Engine Control Module (ECM). Some cooling fans can be controlled by a pulse width modulated control voltage. This allows for varying speeds depending on the rate of engine cooling required. Conversely, where two fans are used on a vehicle, they can either be powered up in series or in parallel. When in series both fans will rotate at low speed, when connected in parallel then both fans will operate at full speed. In the event of a temperature sensor failure, the fan will operate at full output.

OBDII Code P0692 MINI - Electric Fan Activation - AutoCodes.com — P0692 MINI Code - Electric Fan Activation

What does this mean?

What are the Possible Causes of the DTC P0692 MINI?

Faulty Fan 1 Relay
Fan 1 Relay harness is open or shorted
Fan 1 Relay circuit poor electrical connection
Faulty Fan 1
Fan 1 harness is open or shorted
Fan 1 circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0692 MINI?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0692 MINI code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0692 MINI code?

Need more information on how to fix the P0692 MINI code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0692 MINI code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0692 MINI Code

1. What does the OBDII code P0692 mean on a MINI?

P0692 indicates a problem with the electric fan circuit, specifically a high voltage condition in the fan activation system.

2. What are the symptoms of a P0692 code in a MINI?

Common symptoms include the engine overheating, the cooling fan not functioning properly, or the fan running continuously.

3. What causes the P0692 code to trigger in a MINI?

Possible causes include a faulty cooling fan relay, a damaged cooling fan motor, a short circuit in the wiring, or a malfunctioning Engine Control Module (ECM).

4. Can I drive my MINI with a P0692 code?

Itâ€™s not recommended to drive with this code for an extended period, as it could lead to engine overheating and potential damage.

5. How do I diagnose the P0692 code in my MINI?

Start by inspecting the cooling fan, relay, and related wiring for damage or corrosion. Use a multimeter to check for shorts or high resistance in the circuit.

6. How is the P0692 code fixed on a MINI?

Common fixes include replacing the faulty cooling fan relay, repairing or replacing damaged wiring, or replacing the cooling fan motor if itâ€™s defective.

7. Could a blown fuse cause the P0692 code in a MINI?

Yes, a blown fuse in the cooling fan circuit could cause this code, so itâ€™s important to check all related fuses.

8. Does the P0692 code mean my cooling fan is broken?

Not necessarily. It could indicate an issue with the relay, wiring, or ECM, rather than the fan itself.

9. How much does it cost to fix the P0692 code on a MINI?

Repair costs vary depending on the issue, but replacing a cooling fan relay typically costs $100â€“$200, while a fan motor replacement could range from $300â€“$600.

10. Can a P0692 code reset itself after repairs?

In some cases, the code may clear after resolving the issue, but itâ€™s recommended to use an OBDII scanner to erase it and verify the fix.