AutoCodes – Generic – P0680

P0680 Code - Cylinder 10 Glow Plug Circuit Fault

Quick Answer

The glow plug system is used to assist in providing the heat required to begin combustion during cold engine temperatures. Common causes include Faulty cylinder #10 glow plug, Cylinder #10 glow plug harness is open or shorted, Cylinder #10 glow plug circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0680 indicates Cylinder 10 Glow Plug Circuit Fault.
Common causes: Common causes include Faulty cylinder #10 glow plug, Cylinder #10 glow plug harness is open or shorted, Cylinder #10 glow plug circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 8,169

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 05, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0680 Description

The glow plug system is used to assist in providing the heat required to begin combustion during cold engine temperatures. The glow plugs are heated before and during cranking, as well as initial engine operation. The Engine Control Module (ECM) controls the glow plug ON times by monitoring coolant temperature and glow plug voltage. The California Glow Plug system has eight individual glow plug supply circuits between the controller and the glow plugs. If the feedback voltage from the controller to the ECM is not within range, the ECM sets the OBDII code.

OBDII Code P0680 - Cylinder 10 Glow Plug Circuit Fault - AutoCodes.com — P0680 Code - Cylinder 10 Glow Plug Circuit Fault

What does this mean?

What are the Possible Causes of the DTC P0680?

Faulty cylinder #10 glow plug
Cylinder #10 glow plug harness is open or shorted
Cylinder #10 glow plug circuit poor electrical connection
Faulty glow plug module

How to Fix the DTC P0680?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0680 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0680 code?

Need more information on how to fix the P0680 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0680 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P0680 Ford — Cylinder 10 Glow Plug Circuit Fault
P0680 Volkswagen — Cylinder 10 Glow Plug Circuit Fault

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.