AutoCodes – Suzuki – P0654 Suzuki

P0654 Suzuki Code - Engine Speed Output Circuit

Quick Answer

The Instrument Panel Cluster (IPC) supplies a voltage to the Engine Speed Output circuit. Common causes include Faulty Instrument Cluster, Instrument Cluster harness is open or shorted, Instrument Cluster circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0654 Suzuki indicates Engine Speed Output Circuit.
Common causes: Common causes include Faulty Instrument Cluster, Instrument Cluster harness is open or shorted, Instrument Cluster circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,510

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 02, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0654 Suzuki Description

The Instrument Panel Cluster (IPC) supplies a voltage to the Engine Speed Output circuit. The Powertrain Control Module (PCM) creates the Engine Speed Output signal by rapidly grounding this circuit via an internal switch called a driver. The other components on this circuit recognize the voltage being pulled to ground as an indication of engine speed. The driver supplies the ground for the component being controlled. Each driver has a fault line which the PCM monitors. When the PCM commands a component ON, the voltage of the control circuit should be low (near 0 volts). When the PCM commands the control circuit to a component OFF, the voltage potential of the circuit should be high (near battery voltage).

OBDII Code P0654 Suzuki - Engine Speed Output Circuit - AutoCodes.com — P0654 Suzuki Code - Engine Speed Output Circuit

What does this mean?

What are the Possible Causes of the DTC P0654 Suzuki?

Faulty Instrument Cluster
Instrument Cluster harness is open or shorted
Instrument Cluster circuit poor electrical connection
Faulty PCM

How to Fix the DTC P0654 Suzuki?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0654 Suzuki code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0654 Suzuki code?

Need more information on how to fix the P0654 Suzuki code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0654 Suzuki code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0654 Suzuki Code

1. What does the OBDII code P0654 on a Suzuki mean?

P0654 indicates a malfunction in the engine speed output circuit, which is responsible for sending engine RPM data to the instrument cluster or other systems.

2. What are the symptoms of a P0654 code in a Suzuki?

Common symptoms include a non-functional or erratic tachometer, engine misfire, poor performance, or the illumination of the check engine light.

3. What causes the P0654 code to appear on a Suzuki?

It can be caused by a faulty crankshaft position sensor, damaged wiring or connectors, a failed powertrain control module (PCM), or issues with the instrument cluster.

4. Can you drive a Suzuki with a P0654 code?

While the vehicle may still be drivable, it's not advised as the issue could lead to further problems, such as misfires or engine performance degradation.

5. How do you diagnose a P0654 code on a Suzuki?

Diagnosis involves checking the wiring and connectors related to the engine speed output circuit, testing the crankshaft position sensor, and verifying the functionality of the PCM and tachometer.

6. How do you fix a P0654 code on a Suzuki?

Repairs may include replacing a faulty crankshaft position sensor, repairing damaged wiring, cleaning or reconnecting corroded connectors, or reprogramming or replacing the PCM.

7. How much does it cost to repair a P0654 code on a Suzuki?

The repair cost depends on the root cause. Sensor replacement may cost $150-$300, while PCM replacement or reprogramming can be more expensive, ranging from $500 to $1,200.

8. Can a faulty PCM cause the P0654 code on a Suzuki?

Yes, a malfunctioning PCM can cause the P0654 code if it fails to process or transmit engine speed data properly.

9. Can a dead tachometer trigger the P0654 code on a Suzuki?

Yes, if the tachometer or its wiring fails, it can result in the P0654 code since the engine speed output circuit directly impacts the tachometer's operation.

10. Will clearing the code fix the P0654 issue on a Suzuki?

Clearing the code might temporarily turn off the check engine light, but if the underlying issue is not resolved, the code will return.